mariuscomper.uk

How much do you pay for shared heating in your block, with the radiators off?

You turned the radiators off, or fitted your own boiler, and a heating line still lands in your monthly service charge. In Romanian blocks with vertical pipework and heat cost allocators, part of the stairwell's heat is split across every flat by floor area, including flats whose allocators read zero. Here you find the percentage for your county and month, and your own common share.

The short answer: with the radiators off, the common part does not fall to zero. The regulation of ANRE, Romania's energy regulator (Order 7/2024, in force since 1 August 2024), splits a calculation unit's heat into common and individual consumption. The common part is paid by every owner, disconnected ones included, in proportion to the flat's usable area.

A hypothetical example, one Bucharest stairwell of 60 flats in November: 24 flats disconnected or reading zero give a common share of 40%. At 25, the share rises to 45%, because the disconnection degree crosses the 40% threshold. One extra flat at zero moves the whole stairwell to another percentage. Move the count in the calculator and watch the threshold.

The stairwell heating riser, filled to the common percentage K
K = 40%

of the calculation unit's heat is split in common, by usable area

București · November · 10 of 60 flats at zero or disconnected

The common-share calculator

It covers only blocks with vertical distribution and heat cost allocators, not horizontal systems with individual meters. The calculator shows the common part only, never a total bill.

A connected flat whose allocated units all read zero that month counts here: the regulation treats it as disconnected for that month (art. 13(2)).

My part, in lei

Heating only, without hot water and the rest of the service charge. The starting value, 12,000 lei, is a hypothetical example.

K = 40%

The ANRE table: all 18 percentages

Annex 2 to the regulation approved by ANRE Order 7/2024. The provider picks K by temperature zone, month of consumption and the calculation unit's disconnection degree. It is not voted at a general meeting.

Zone · disconnection degreeSep, Oct, Apr, MayNov, MarDec, Jan, Feb
Cold · 0–40%40%35%30%
Cold · 41–70%45%40%35%
Cold · 71–99%50%45%40%
Warm and temperate · 0–40%45%40%35%
Warm and temperate · 41–70%50%45%40%
Warm and temperate · 71–99%60%55%50%

The exception: if every unit allocated across the calculation unit's radiators is zero, K is 100% (art. 13(3)). In June, July and August the table gives no percentage, because it is outside the heating season.

Which zone is your county in

Cold zone (15 counties): Alba, Bacău, Bistrița-Năsăud, Botoșani, Brașov, Cluj, Covasna, Harghita, Hunedoara, Iași, Mureș, Neamț, Sibiu, Suceava, Vaslui.

Temperate zone (17 counties): Argeș, Bihor, Brăila, Buzău, Dâmbovița, Dolj, Galați, Gorj, Ialomița, Ilfov, Maramureș, Olt, Prahova, Satu Mare, Sălaj, Teleorman, Vrancea.

Warm zone (nine counties and the municipality of Bucharest, Romania's capital): Arad, București, Caraș-Severin, Călărași, Constanța, Giurgiu, Mehedinți, Timiș, Tulcea, Vâlcea. In the table above, the warm and temperate zones share the same percentages. The county split is Annex 2 to Law 226/2021.

Why do you pay for heating with the radiators off?

Because an allocator measures only the individual part. Before that, the provider takes a common share, K% of the heat metered where the calculation unit connects. The common share covers the heat of the risers passing through flats, of basement and stairwell pipework, and the shared system's losses. It is split across every flat and space by usable area, disconnected ones included, whether or not heating columns pass through the flat and whether they are insulated (art. 14–15).

What remains after the common share is split by allocator units, with corrections for radiators and position. That is the individual part, which this page does not compute: you need the provider's apportionment note. A disconnected flat pays only the common part; its individual part is zero.

The common percentage rises when many flats are disconnected or at zero, because the same shared pipework is split among fewer active consumers. The disconnection degree rounds up to a whole number: 40.1% becomes 41% and moves the stairwell to the next row of the table.

What documents to ask for, to check the note

  1. The provider's apportionment note for that month. From it you take the calculation unit, the K percentage used, the disconnection degree and the areas.
  2. The counts of disconnected flats and of flats with every unit at zero, out of the calculation unit's total. With them you check the degree and the table row.
  3. The amount billed for heating the calculation unit only, separate from hot water and the rest of the service charge.
  4. Your flat's usable area and the total of usable areas the provider used. Your common part is the heating amount × K × (your area / total).
  5. The list of allocators registered to your flat. If the note shows one allocator more than the radiators in your home, ask for the correction in writing, with a registration number for your request.

This page reproduces the rule and its arithmetic. It does not decide whether the provider's note is right in your case, and it does not replace the apportionment note.

Sources