Romania's Housing Law 114/1996 · Annex 1 · checked 19 November 2026
How many usable square metres does the flat have, without the balcony?
Two listings both say “usable m²”, but one of them folded the balcony into the big number. Its price per square metre comes out lower without giving you a larger home. Here you split the interior from the balcony and divide each flat's price by its own interior area.
↓ The checker, prefilled with the real example
Does the balcony count in the usable area?
No. Neither the balcony nor the loggia is part of a dwelling's usable area as Romania's Housing Law 114/1996 defines it.
“The usable area of the dwelling is the sum of the usable areas of all its rooms. […] Not included: the area of loggias and balconies, door thresholds, passages with openings up to 1.00 m, radiator niches, and the area taken by stoves and bath boilers […] where heating is by stove.”
Housing Law no. 114/1996, Annex 1, section B, note (Romanian original: „Nu se cuprind: suprafața logiilor și a balcoanelor…”). Full text on Romania's official Legislative Portal.
“Total usable area” (suprafață utilă totală) is not the law's term. In listings it can mean the interior plus the balcony, added together. The addition can be spelled out correctly in the description while the listing's headline — the big number and the price per square metre — still uses the total. Then you end up comparing one flat measured with its balcony against another measured without, and the price per square metre no longer compares the same thing.
A real listing: 41.18 “usable” m², or 38.66 m²?
A two-room flat in Ploiești, a city north of Bucharest, in a listing updated on 8 November 2026 and checked on 13 November 2026, headlined “41.18 usable m²”, €52,000 and €1,263/m². On the same page, the details split the number: 38.66 m² of usable area, an enclosed balcony of 2.52 m², and 41.18 m² of “total usable area”. The portal had divided the price by the total including the balcony.
| What it measures | Value |
|---|---|
| Interior area stated in the details | 38.66 m² |
| Enclosed balcony stated | 2.52 m² |
| Headline total (“total usable area”) | 41.18 m² |
| Asking price | €52,000 |
| Price per m² over the total with balcony (shown in the headline) | €1,263/m² |
| Price per m² over the stated interior | €1,345/m² |
| Gap between the two figures | +€82/m² · +6.5% |
The arithmetic is plain: 38.66 + 2.52 = 41.18; €52,000 over 41.18 m² is €1,263/m², and over 38.66 m² it is €1,345/m². The example only shows that one page used two denominators. It proves nothing about the flat's registered area and is not a valuation.
Check the listing in front of you
Copy three numbers from the listing and answer one question. If the listing never says plainly what its big number covers, “I don't know” shows you both readings instead of an invented verdict.
The result from the listing's numbers
The result checks the arithmetic of the numbers the listing declares. It is not a measurement, not a land-register extract, and no substitute for the cadastral floor plan. A balcony has value too: price per interior square metre compares two listings fairly, but on its own it does not value a flat.
A second listing, measured the same way
Does an enclosed balcony count? What about the 50% rule?
A balcony enclosed with glazing stays a balcony in the flat's documents until authorised documentation says otherwise. The glazing makes it pleasanter and can matter to the price, but by itself it turns it into neither a room nor usable area on the cadastral floor plan (the releveu). If a seller says an enclosed balcony “became a room”, the document that proves it is the updated floor plan, not the listing text.
The rule “an open balcony counts 50%, a loggia 100%” circulates in online calculators, sometimes credited to Law 114/1996 itself. Annex 1 contains no percentage at all: balconies and loggias are excluded entirely from a dwelling's usable area. Percentages like these can appear in commercial valuations or other norms with a different purpose. Mixed into the legal definition, they produce a third number that is neither the interior nor the total and cannot be compared with anything.
To compare two flats you need one thing: the same denominator. Either divide both prices by the interior, or by the total with balcony, saying plainly which. The interior is the denominator in the law and on the floor plan, so it is the one that can be checked against documents.
What to ask for before you pay a deposit
- The flat's cadastral floor plan (releveu) from the cadastral documentation: the plan with every room and its area. There you see the usable area without the balcony and the balcony written separately.
- A land-register extract (extras de carte funciară, from Romania's land register) for that flat: it shows the registered area. Compare the plan on file with the flat as it stands today.
- A written answer to one short question: “Does the headline area include the balcony? How many square metres is the balcony?” If no answer comes, the checker above keeps both readings for you.
- For an enclosed balcony: ask whether the enclosure and any repartitioning appear in authorised documentation. An undocumented enclosure can become the buyer's problem.
- For new flats: ask for the dimensioned plan in the contract, with areas per room, and check whether the offer's “total usable area” adds in the balcony, terrace or loggia.
This page explains one definition in one law and checks a listing's arithmetic. It is not legal advice and no substitute for an authorised measurement.
Sources
The legal definition: Housing Law no. 114/1996, Annex 1, Legislative Portal, text checked on 19 November 2026.
The example: a property listing for a two-room flat in Ploiești (Malu Roșu), updated on 8 November 2026, numbers read on 13 November 2026: 41.18 m² in the headline, 38.66 m² of interior and a 2.52 m² enclosed balcony in the details, price €52,000. Listings change or are withdrawn; the example stands as arithmetic on the numbers published when read.
Guides stating the same rule, in Romanian: Avem Imobiliare, “Usable vs built vs developed area” (4 August 2026, updated 6 September 2026) and CondoFlow, “Flat usable area 2026” (8 September 2026).