Practical sheet P03 · common core
Potato in three solutions
Status: a new protocol, not yet tried in a class. Check the materials and the fit with the class before the lesson.
Materials
- Pieces of potato prepared by the teacher, nine containers, a balance, water, salt, labels, paper towels; instead of the experiment you can use the table of invented data below.
Steps
- The 0%, 2% and 6% salt solutions (mass per volume) are made up to a final volume of 100 ml: dissolve the salt, then top up with water to 100 ml. 100 ml of water plus the salt gives more than 100 ml of solution.
- Use similar pieces from the same potato, three separate containers for each solution, and record the starting mass of each piece.
- Keep the time, the temperature, the volume of solution and the way you blot the pieces the same; weigh them after 30 minutes.
- For each piece, work out the percentage change: 100 × (final mass − initial mass) ÷ initial mass, then the mean for each solution.
- If you use the table provided, write “invented data” and do not present the values as your own results.
Data and starting values
- Exposure time (minutes)
- 30
- Salt (g per 100 ml of final solution)
- 0, 2, 6
- Initial mass (g)
- 20, 20, 20
- Final mass (g), by salt concentration (%)
- Solution with 0% salt
- 21, 20.7, 20.9
- Solution with 2% salt
- 19.6, 19.5, 19.7
- Solution with 6% salt
- 18, 18.2, 17.8