Geography IX RO

Chapter 1 · Maps and coordinatesLesson 1.3

Geographic information systems (GIS): maps built from layers of data

How can you tell how many houses in a village would be flooded by a major flood before it happens?

Before you read: what do you think?

A flood described as a “once in 100 years” event hit a village last year. What is the chance of the same thing happening this year?

See the answer

1%, as in any other year. 1%. The probability is the same every year. “Once in 100 years” is a long-term average, and two such floods can happen in years close together.

On inundatii.ro, the portal of Apele Române, Romania’s national water administration, anyone can look up a Romanian settlement and see how far water would reach in a flood with a one-in-a-hundred chance of occurring in any year. The map was calculated from the shape of the land, river measurements and other data overlaid on a computer.

A map that answers questions

In 1854, the doctor John Snow plotted cholera cases on a map of London and discovered that the illnesses came from a single water source. The map answered a question the list of cases of illness could not settle. Today, the number of houses that would be flooded is found in much the same way: data on houses are overlaid on data about the flood zone on a computer.

A geographic information system, or GIS (also abbreviated SIG in Romanian), brings together computers, software, data and the people who use them. It collects, stores, analyses and displays data linked to a place on Earth’s surface.

On a printed map, a river is a blue line. In a GIS, that river has coordinates and a table of information, and the map on screen is redrawn to answer the question asked.

For the curious

The first computer GIS was started in 1963 by the geographer Roger Tomlinson, for an inventory of Canada’s natural resources.

Data in layers

A thematic layer brings together all objects of the same kind: one layer for rivers, another for roads, another for buildings, another for commune boundaries. All the layers are brought into the same coordinate system, so they can be overlaid.

Layers can be displayed or hidden one at a time and combined. The map on screen is just one of many images that can be made from the same data.

water depth10 m cells (raster)420 housespoints (vector)river and village boundaryline, polygon (vector)overlay63 of 420 houses lie on flooded cells: 15%Water covers 3,500 cells: 35 hectares.
Figure 1The village in the worked example, to scale. Each layer holds one kind of data, all in the same coordinates. Only the overlay shows which 63 of the 420 houses lie on flooded cells.

Vector and raster data

Vector data describe objects with clear boundaries using three shapes: points (a well, a weather station, a summit), lines (a river, a road, a railway) and polygons (a lake, a forest, a commune).

Raster data divide the land into a grid of square cells called pixels. Each cell has a single value: elevation, temperature, water depth or the colour in a satellite image. Raster data suit phenomena that change gradually from place to place.

Cell size determines the level of detail. In a raster with 10 m cells, an object smaller than 10 m no longer appears separately, because the cell has only one value.

For the curious

The same settlement can be a point on a map of the country and a polygon on a county plan.

point: wellline: riverpolygon:lakewellhas vanishedVectorRasterPoint, line, polygon:each shape has a rowin the attribute table.10 m cells, each withone value: here, waterdepth. The shore is stepped.
Figure 2Vector data preserve shapes with clear boundaries, each with its own row in the attribute table. Raster data give one value to each 10 m cell: the lakeshore becomes stepped, and the well, smaller than a cell, disappears.

Attributes: the table behind the map

Each vector object has attributes, information recorded in a table: for a river, its name, length and discharge; for a commune, its name, county and population. One row in the table corresponds to one object on the map.

The table can be queried. Ask “show communes with more than 5,000 inhabitants” and the software selects and colours them on the map in seconds.

What overlay can reveal

The most widely used analysis is layer overlay: placing the buildings layer over the flood-zone layer shows which buildings are exposed. Another analysis is a buffer, the area within a given distance of an object, for example 500 m around a school.

Every result has limits, which must be stated alongside it. A buffer measures straight-line distance; a river without a bridge or a railway can make the actual journey much longer. Two layers that match on a map show a connection in location that then needs explaining; the match alone does not prove that one phenomenon causes the other.

For the curious

The quality of a layer depends on the data used to make it: who measured them and when matters.

Worked example

How many houses are flooded

In an exercise, a village has two layers. The first is a raster of water depth in a flood, with 10 m × 10 m cells. The second is a vector layer containing the village’s 420 houses, each drawn as a point.

Flooded area: one cell covers 10 × 10 = 100 m². In the raster, 3,500 cells have a depth greater than zero. The flooded area is 3,500 × 100 = 350,000 m², or 35 hectares.

Houses exposed: by overlaying the layers, the software counts the points that fall in flooded cells and finds 63. That is 63 out of 420 houses, or 15%. The attribute table for these 63 points then gives the addresses, so the town hall knows whom to warn first.

In Romania

Flood hazard maps, commune boundaries and OpenStreetMap

The flood hazard maps of Apele Române, Romania’s national water administration, show the area that would be covered by water in three situations: a low-probability flood of 0.1% per year (an average of one in 1,000 years), a medium-probability flood of 1% per year (one in 100 years), and a high-probability flood of 10% per year (one in 10 years). More than 33,000 river cross-sections were measured for the maps, and digital terrain models were made for more than 28,000 km² using laser scanning from aircraft.

The National Agency for Cadastre and Land Registration (ANCPI) publishes a layer showing the boundaries of all the country’s administrative units: communes, towns and municipalities. The file can be downloaded free and opened in any GIS software.

OpenStreetMap, a project started in 2004 in Britain, is a volunteer-made map of the world with data that anyone can use freely. People have mapped Romania’s streets, paths and buildings by adding the places they each know.

In brief

  1. A geographic information system (GIS) brings together computers, software, data and people to collect, store, analyse and display data linked to a place on Earth.
  2. Data are organised in thematic layers that use the same coordinate system and can be overlaid.
  3. Vector data represent objects as points, lines and polygons; raster data divide the land into cells (pixels), each with one value.
  4. Attributes are information about each object, recorded in a table that can be queried.
  5. Layer overlay and buffers are basic analyses; a match between two layers shows a connection in location and does not by itself prove a cause.
  6. In Romania, Apele Române’s flood hazard maps, the administrative boundaries published by ANCPI and OpenStreetMap are data used in GIS.
Worksheet

Common mistakes

  • WrongGIS means a map on a computer, like the one on a phone.

    RightThe map is only what is visible. A GIS also includes the data behind it, with coordinates and attributes, and the analyses they allow: overlays, selections and measurements.

  • WrongIf two layers match on a map, one causes the other.

    RightThe match only shows that the phenomena occur in the same place. Establishing a cause requires a tested explanation and the elimination of other factors.

  • WrongA flood with a 1% probability comes once every 100 years, so it is followed by 99 years without floods.

    RightThe probability of 1% is the same every year. “Once in 100 years” is a long-term average; two such floods can happen in years close together.

Test yourself

Six questions. For the first five you see the explanation at once, with the paragraph of the lesson that supports it; for the ones with a written answer you compare with a good answer.

  1. How are the wells in a village best represented in a vector layer?

    Answer

    c) As points. A well has a position, and its extent does not matter at village scale, so it is represented as a point.

  2. What kind of information is best suited to raster data?

    Answer

    a) Land elevation. Elevation changes gradually from place to place, so it can be represented by a grid of cells with values. The other three are objects with clear boundaries, suited to vector data.

  3. In a raster with 20 m × 20 m cells, water covers 250 cells. What area is flooded, in hectares? (One hectare is 10,000 m².)

    ha
    Answer

    10 ha. One cell is 20 × 20 = 400 m². 250 × 400 = 100,000 m² = 10 ha. Multiply by the area of the cell, not the length of its side.

  4. What are attributes in a GIS?

    Answer

    b) Information about each object, recorded in a table. Each object on the map has a corresponding table row with information about it: name, length or population.

  5. A 500 m buffer drawn around a school contains 300 homes. What can be said for certain about them?

    Answer

    d) They are at most 500 m from the school in a straight line. A buffer measures geometric distance. The walking route depends on streets, bridges and crossings and can be much longer.

  6. On a GIS map, the neighbourhoods with the most pharmacies also have the most registered cases of illness. A classmate concludes that pharmacies make people ill. What do you say, and what layer would you add?

    A good answer

    The two layers match in location, but the match does not prove a cause. A simpler explanation is that both depend on population: where more people live, there are more cases of illness and more pharmacies. I would add a layer showing the population of each neighbourhood and compare the number of cases per 1,000 inhabitants.

    A complete answer separates a match on the map from cause, proposes a third factor (population or residents’ ages), and calls for a comparison relative to population.

Terms

geographic information system
A combination of computers, software, data and people that collects, stores, analyses and displays data linked to a place on Earth; abbreviated GIS, or SIG in Romanian.
thematic layer
All objects of the same kind in a GIS (for example, all rivers), which can be overlaid on other layers.
vector data
Data that represent objects as points, lines and polygons, each with coordinates.
raster data
Data that divide land into a grid of cells (pixels), each with a single value.
attributes
Information about an object on a map, recorded in a table.
buffer
The area within a given straight-line distance of an object.
Sources and link to the programme

From the programme: “Geographic information systems” (common core). Programme competences covered: 2.1, 2.5, 5.1.

Your place

Choose your city, commune or village, and the lessons will add the example from home: how long the day lasts, when true noon falls, how far the Vrancea earthquake zone is. The choice stays on this device.