Chemistry 9 RO

Chapter 7 · The covalent bondLesson 7.7SN Natural sciences (3 hours) · beyond your profile

Hybridisation of the carbon atom; types of hybridisation

Why carbon makes four equal bonds with only two unpaired electrons

Carbon’s configuration shows two unpaired electrons, yet methane has four identical C–H bonds. How is this explained?

Test tomorrowten questions from chapter 7

Before you read: what do you think?

The four C–H bonds in a methane molecule, as measured, are:

See the answer

All four are identical. The 2s²2p² configuration does not explain this. The hybridisation model was introduced to do just that: carbon’s 2s and 2p orbitals combine into four equal hybrid orbitals, pointing towards the corners of a tetrahedron.

Diamond cuts glass, while pencil lead leaves a mark on paper. Both are made entirely of carbon atoms. The difference comes from the number of σ bonds each carbon atom has: four in diamond, three in graphite. A simple rule tells you this number.

The 2s²2p² configuration does not explain methaneWhat the particles do

Carbon has the configuration 1s²2s²2p². In the valence shell, the two 2s electrons form a pair, while the two 2p electrons are unpaired, in p orbitals perpendicular to each other. With this configuration, carbon would form two bonds at 90°.

Measurements show something else. In methane, carbon has four identical C–H bonds, at angles of 109.5°. In ethene, the bonds lie in a plane, at 120°. In acetylene, they lie in a straight line, at 180°.

Hybridisation is the model that connects these facts. The 2s orbital and some of the 2p orbitals of the same atom combine into equal hybrid orbitals, pointing as far apart as possible, as in the VSEPR model. Hybridisation is not an event anyone could see: it is a description built to explain the observed geometry, and orbitals remain regions of probability, not paths.

Three types of hybridisation: sp³, sp² and spWhat the particles do

In sp³, one s orbital and three p orbitals combine to give four equal hybrid orbitals, pointing towards the corners of a tetrahedron (109.5°). Each forms a σ bond: carbon has four σ bonds and no π bonds. Examples: methane, ethane, CCl₄.

In sp², one s orbital and two p orbitals combine to give three hybrid orbitals in a plane, at 120°. One unhybridised p orbital remains, perpendicular to the plane, and forms the π bond. Carbon has three σ bonds and one π bond. Example: ethene.

In sp, one s orbital and one p orbital combine to give two hybrid orbitals in a straight line, at 180°. Two unhybridised p orbitals remain, perpendicular to each other, and form two π bonds. Carbon has two σ bonds and two π bonds. Examples: acetylene, CO₂, HCN.

The number of hybrid orbitals equals the number of orbitals combined: 1 + 3 = 4, 1 + 2 = 3, 1 + 1 = 2.

sp³sp²sp109.5°4 hybrids, 4 σ bonds120°3 hybrids + 1 p180°2 hybrids + 2 phybrid orbitalunhybridised p orbitalSmall lobes behind the hybrid orbitals are not shown.
Figure 1The unhybridised p orbitals, drawn as two opposite lobes (see key), form the π bonds: none in sp³, one in sp², two in sp. Perspective drawing; orbitals are regions of probability.

The practical rule: count carbon’s σ bondsHow it is written

The structural formula tells you the type of hybridisation. π bonds do not count, because they use the remaining p orbitals.

Carbon with four σ bonds is sp³; with three, sp²; with two, sp. Carbon in CCl₄, ethane and diamond is sp³, in ethene and graphite it is sp², and in acetylene and CO₂ it is sp.

Check: carbon’s σ and π bonds add up to four. An sp³ carbon has 4σ + 0π, an sp² carbon has 3σ + 1π, and an sp carbon has 2σ + 2π.

Diamond and graphite: the same element with two hybridisations

In diamond, each carbon atom is sp³ and bonded to four neighbours in a three-dimensional lattice, with a C–C length of approximately 154 pm. The lattice is very rigid: diamond is the hardest material on the Mohs scale.

In graphite, each atom is sp² and bonded to three neighbours in a flat layer of hexagons. The C–C bond is 142 pm, shorter than in diamond because each atom also takes part in a π system. The layers are 335 pm apart and weakly bonded, so they slide easily. That is why pencil lead, made of graphite mixed with clay, leaves thin layers on paper.

For the curious

The C–C distance in graphite, 142 pm, is 154 − 142 = 12 pm shorter than in diamond. Its value lies between that of a single bond (154 pm) and a double bond (134 pm). Graphite’s π electrons are spread across the whole layer and do not belong to a single bond.

335 pmdiamond: carbon sp³C–C 154 pm, four neighboursgraphite: carbon sp²C–C 142 pm, 3 neighboursBoth drawings: same scale, in perspective.
Figure 2Diamond is a single three-dimensional lattice; graphite is made of flat, weakly bonded layers that slide. The distance between layers, 335 pm, is more than twice the bond length within a layer.

Worked example

Hybridisation of each carbon in CH₂=CH–C≡CH

Count the σ bonds of each carbon, starting from the left.

C-1, in CH₂=: two C–H bonds and one σ from the double bond, giving 3σ and 1π. Hybridisation: sp².

C-2, in =CH–: one C–H bond, one σ from the double bond and one σ to C-3, giving 3σ and 1π. Hybridisation: sp².

C-3, in –C≡: one σ to C-2 and one σ from the triple bond, giving 2σ and 2π. Hybridisation: sp.

C-4, in ≡CH: one σ from the triple bond and one C–H bond, giving 2σ and 2π. Hybridisation: sp.

Check: for each carbon, σ + π = 4. The angles are 120° around C-1 and C-2, and 180° around C-3 and C-4, respectively.

In Romania

Costin Nenițescu and the ring with sp² carbon atoms

In 1929, the chemist Costin Nenițescu reported a reaction between benzoquinone and esters of β-aminocrotonic acid in a journal of the Romanian Chemical Society. The products are 5-hydroxyindole derivatives, and the reaction is called the Nenițescu indole synthesis.

The 5-hydroxyindole skeleton also appears in serotonin, a substance that carries signals between nerve cells. The eight carbon atoms of the indole ring are sp²: each has three σ bonds in the same plane, and the remaining p orbitals form the ring’s π system. The ring is therefore flat, like a piece of graphite.

In short

  1. The 2s²2p² configuration does not explain the four identical bonds in methane; the hybridisation model combines the 2s orbital with 2p orbitals to form equal hybrid orbitals.
  2. sp³: four σ bonds, tetrahedron, 109.5° (methane, ethane, CCl₄, diamond). sp²: three σ and one π, planar, 120° (ethene, graphite). sp: two σ and two π, linear, 180° (acetylene, CO₂, HCN).
  3. Practical rule: carbon with 4σ is sp³, with 3σ is sp², with 2σ is sp; π bonds are not counted.
  4. For any carbon, the number of σ and π bonds adds up to four.
  5. Diamond has sp³ carbon (rigid lattice, 154 pm), while graphite has sp² carbon (flat layers, C–C of 142 pm, layers 335 pm apart).
WorksheetMy notebook

Common mistakes

  • WrongHybridisation is a process that happens in the atom before every reaction.

    RightHybridisation is a model: a mathematical combination of orbitals, chosen because it explains the observed geometry (angles, number and type of bonds).

  • WrongCarbon in ethene is sp³ because it has four bonds.

    RightCount the σ bonds: in ethene, carbon has three σ and one π, so it is sp².

  • WrongAn sp² orbital is a p orbital crossed with two s orbitals.

    RightAn sp² orbital results from combining one s orbital with two p orbitals. The third p orbital remains unhybridised and forms the π bond.

Test yourself

7 questions. For the first 6 you see the explanation at once, with the paragraph of the lesson that supports it; for the written ones you compare with a good answer.

  1. What hybridisation does the carbon atom in ethene, CH₂=CH₂, have?

    Answer

    b) sp². Each carbon in ethene has three σ bonds (two C–H and one C–C) and one π bond, so it is sp².

  2. What hybridisation does the carbon atom in carbon dioxide, O=C=O, have?

    Answer

    c) sp. Carbon in CO₂ has two σ bonds and two π bonds, so it is sp, and the molecule is linear.

  3. Which statement about hybridisation is correct?

    Answer

    b) It is a model that connects the number of σ bonds to the geometry of the atom. Hybridisation is a description used to explain the observed geometry; it cannot be seen directly and does not change the number of electrons.

  4. What hybridisation do the carbon atoms in diamond have?

    Answer

    d) sp³. Each atom in diamond is bonded to four neighbours by four σ bonds, so it is sp³.

  5. How many unhybridised p orbitals remain on an sp-hybridised carbon atom? (An atom has three p orbitals in its valence shell.)

    orbitals
    Answer

    2 orbitals. sp hybridisation uses one p orbital, so 3 − 1 = 2 p orbitals remain and form the two π bonds.

  6. Place each carbon atom under its hybridisation.

    Answer

    sp³: Carbon in CCl₄; Carbon in ethane.

    sp²: Carbon in ethene; Carbon in graphite.

    sp: Carbon in acetylene; Carbon in CO₂.

    Count the σ bonds: four means sp³, three sp², two sp.

  7. Explain why graphite leaves layers on paper, even though it is made of the same element as diamond, which cuts glass.

    A good answer

    In graphite, carbon atoms are sp² and form flat layers of hexagons, very weakly bonded to each other (the layers are 335 pm apart). The layers slide and remain on the paper. In diamond, the atoms are sp³ and form a rigid three-dimensional lattice, with strong σ bonds in every direction, so diamond is very hard.

    A complete answer says that graphite has sp² carbon in weakly bonded layers, while diamond has sp³ carbon in a three-dimensional lattice.

Terms

hybridisation
A model in which s and p orbitals of the same atom combine into equal hybrid orbitals to explain molecular geometry.
hybrid orbital
An orbital resulting from the combination of one s orbital with one or more p orbitals of the same atom.
sp³
Hybridisation with four hybrid orbitals pointing tetrahedrally (109.5°); carbon with four σ bonds.
sp²
Hybridisation with three hybrid orbitals in a plane (120°) and one unhybridised p orbital; carbon with three σ bonds and one π bond.
sp
Hybridisation with two hybrid orbitals in a straight line (180°) and two unhybridised p orbitals; carbon with two σ bonds and two π bonds.
unhybridised orbital
A p orbital that does not enter the combination and forms a π bond.
Sources and link to the programme
  • OpenStax – Chemistry 2e, 8.2 Hybrid Atomic Orbitals – sp³ hybridisation (methane, 109.5°), sp² (ethene, 120°, one unhybridised p orbital) and sp (acetylene, 180°); hybridisation as a model created to explain observed geometries
  • OpenStax – Chemistry 2e, 8.3 Multiple Bonds – the π bond from unhybridised p orbitals; the number of σ and π bonds in ethene and acetylene
  • IUPAC Gold Book – graphite – graphite: layers with sp² hybridisation and a C–C distance of 141.7 pm; the layers are weakly bonded
  • Wikipedia – Graphite – layers of sp² carbon atoms in hexagons, C–C of 0.142 nm, layers 0.335 nm apart; pencil lead made of graphite and clay
  • Wikipedia – Diamond – sp³ carbon atoms, each bonded to four neighbours in tetrahedra; hardness 10 on the Mohs scale
  • Wikipedia – Nenitzescu indole synthesis – the synthesis described by Costin Nenițescu in 1929 (benzoquinone and β-aminocrotonic esters, 5-hydroxyindoles); serotonin as a 5-hydroxyindole derivative; the paper in Bulletin de la Société Chimique de Roumanie, vol. 11

From the programme: “Hybridisation of the carbon atom; types of hybridisation”; “Type of hybridisation according to the number of sigma and pi bonds formed by the carbon atom” (SN: Natural sciences (3 hours)). Specific competences followed: 5.4.