Chemistry 9 RO

Chapter 11 · GasesLesson 11.3MI Mathematics–informatics (2 hours) · beyond your profile

Mole fraction, mean molar mass

How much does a mole of air weigh?

Air is 78% nitrogen and 21% oxygen. How much does one mole of this mixture weigh: 28 g, 32 g or something else?

Test tomorrowten questions from chapter 11

Before you read: what do you think?

One mole of nitrogen weighs 28 g, and one mole of oxygen weighs 32 g. Dry air is 78% nitrogen, 21% oxygen and approximately 1% argon (40 g/mol). How much does one mole of air weigh?

See the answer

Approximately 29 g. Each gas contributes in proportion to its number of molecules: 0.78 · 28 + 0.21 · 32 + 0.01 · 40 = 28.96. The simple average gives the wrong result, because nitrogen is nearly four times as common as oxygen.

You breathe a mixture of gases all the time: out of 100 particles of dry air, 78 are nitrogen molecules, 21 are oxygen molecules and approximately one is an argon atom. The same kind of mixture is found in a gas cylinder for a cooker, in natural gas from a pipeline and in biogas from a farm. Two quantities describe them all: mole fraction and mean molar mass.

Mole fraction: what share of the molecules are of one kind

The mole fraction of a component i in a mixture is the ratio of its amount of substance to the total amount of substance in the mixture: xi = ni ÷ ntotal. It has no unit and lies between 0 and 1; the mole fractions of all the components add up to 1. Multiply the mole fraction by 100 to get the mole percentage.

The ratio of the amounts in moles is also the ratio of the numbers of molecules, because 1 mol contains the same number of particles whatever the substance. For gases, Avogadro’s law says something else: at the same pressure and temperature, the volume of each gas is proportional to n. So in a gas mixture, the mole fraction is also the volume fraction. “21% oxygen in air” means 21 molecules out of 100, or 21 litres of oxygen in 100 litres of air, under the same conditions.

Mole fraction and mass fraction are different. An oxygen molecule weighs more than a nitrogen molecule, so oxygen makes up a greater share of the mass of air than of its molecules: 21% of the molecules, but nearly 23% of the mass (the calculation is below).

100 air particles N₂ 78 O₂ 21 Ar 1 by number by mass 21% 23.2% 78% oxygen’s share
Figure 1Of 100 particles of air, 21 are oxygen molecules, but oxygen accounts for 23.2% of the mass: its molecule weighs more than a nitrogen molecule.

Mean molar mass: one mole of a mixture

The mean molar mass of a mixture is its total mass divided by its total amount of substance: M = mtotal ÷ ntotal. The total mass is the sum of the masses of the components, mi = ni · Mi. Dividing by ntotal gives the formula used in calculations:

M = x₁M₁ + x₂M₂ + … = Σ xi · Mi

For dry air, with 78% nitrogen, 21% oxygen and 1% argon: M = 0.78 · 28 + 0.21 · 32 + 0.01 · 40 = 28.96 g/mol, approximately 29 g/mol.

It is a weighted average of the molar masses. The result is always between the lowest and highest molar masses in the mixture. For two components, it is closer to that of the component with the greater mole fraction. Air has no molecules of 29 u: it contains nitrogen molecules, oxygen molecules and argon atoms, and 29 g/mol is the ratio of the mass to the amount of a mixture.

The mass fraction of oxygen in air is found by dividing its mass by the mass of the mixture: 0.21 · 32 ÷ 28.96 ≈ 0.232, or 23.2%.

column height: mole fraction N₂ 0.78 O₂ 0.21 Ar 0.01 28 32 40 g/mol M = 28.96 g/mol balance point M = 0.78 · 28 + 0.21 · 32 + 0.01 · 40 = 28.96 g/mol
Figure 2The mean molar mass is the point where the lever balances: 28.96 g/mol, close to nitrogen because nitrogen has the largest mole fraction. Positions and heights are to scale.

From masses to mole fractions and back

When the masses of the components are given, the steps are: calculate the amounts ni = mi ÷ Mi, add them to get ntotal, find the mole fractions xi = ni ÷ ntotal and calculate the sum xi · Mi. The same result comes directly from M = mtotal ÷ ntotal.

The composition stays the same only while the mixture does not react and nothing condenses. If the gases react, the amounts are recalculated after the reaction.

Using the mean molar mass, a mixture is treated as a single gas in the equation of state: n = m ÷ M, so pV = (m ÷ M) · RT. For example, 58 g of dry air gives n = 58 ÷ 29 = 2 mol, which occupies 2 · 22.4 = 44.8 L at normal conditions.

For the curious

Humid air contains water vapour, M(H₂O) = 2 + 16 = 18 g/mol, which is lighter than nitrogen and oxygen. Air with 2% water vapour and 98% dry air has M = 0.98 · 28.96 + 0.02 · 18 ≈ 28.74 g/mol. Humid air is therefore slightly lighter than dry air under the same conditions.

Worked example

A biogas-type mixture

A mixture contains 32 g of methane, CH₄, and 44 g of carbon dioxide, CO₂. What are the mole fractions, the mean molar mass and the volume of the mixture at normal conditions?

Molar masses: M(CH₄) = 12 + 4 = 16 g/mol, M(CO₂) = 12 + 32 = 44 g/mol.

Amounts: n(CH₄) = 32 ÷ 16 = 2 mol, n(CO₂) = 44 ÷ 44 = 1 mol, and ntotal = 2 + 1 = 3 mol.

Mole fractions: x(CH₄) = 2 ÷ 3 ≈ 0.667 and x(CO₂) = 1 ÷ 3 ≈ 0.333. The sum is 1.

Mean molar mass: M = 2 ÷ 3 · 16 + 1 ÷ 3 · 44 ≈ 25.3 g/mol. Check: mtotal ÷ ntotal = 76 ÷ 3 ≈ 25.3 g/mol, and the value lies between 16 and 44, closer to 16.

Volume at normal conditions: V = 3 · 22.4 = 67.2 L, of which methane occupies 66.7%.

In Romania

What pipeline gas may contain

The national gas transmission system, operated by Transgaz, receives gas that must meet composition limits, in mole percentages: at least 70% methane, at most 10% ethane, at most 5% nitrogen and at most 2.5% carbon dioxide.

A mixture chosen as a calculation example fits these limits: 90% CH₄, 5% C₂H₆, 3% N₂ and 2% CO₂. Its mean molar mass is M = 0.90 · 16 + 0.05 · 30 + 0.03 · 28 + 0.02 · 44 = 17.62 g/mol, well below 29 g/mol, the mean molar mass of air.

In short

  1. The mole fraction of component i is xi = ni ÷ ntotal; it has no unit, and the mole fractions add up to 1.
  2. For gases at the same pressure and temperature, the mole fraction equals the volume fraction and the fraction of the number of molecules; the mass fraction is different.
  3. Mean molar mass is M = mtotal ÷ ntotal = Σ xi · Mi, an average weighted by mole fractions.
  4. Dry air (78% N₂, 21% O₂, 1% Ar) has M ≈ 29 g/mol; oxygen makes up 21% of the molecules and nearly 23% of the mass.
  5. M lies between the lowest and highest molar masses in the mixture.
WorksheetMy notebook

Common mistakes

  • WrongAir is 21% oxygen, so 21% of its mass is oxygen.

    Right21% is the mole percentage and the volume percentage. Oxygen makes up nearly 23% of the mass, because an oxygen molecule weighs more than a nitrogen molecule.

  • WrongThe mean molar mass of a gas mixture is the arithmetic mean of the molar masses of its components.

    RightIt is an average weighted by the mole fractions: M = Σ xi · Mi. The simple average is correct only if the components have equal amounts.

  • WrongAir contains molecules with a mass of 29 u.

    RightAir is a mixture of nitrogen molecules, oxygen molecules and argon atoms. The value 29 g/mol is the mass of one mole of the mixture.

Test yourself

7 questions. For the first 6 you see the explanation at once, with the paragraph of the lesson that supports it; for the written ones you compare with a good answer.

  1. What does “dry air contains 21% oxygen” mean, without further detail?

    Answer

    b) 21 oxygen molecules out of 100 air particles. The percentage of a gas in a gas mixture is its mole percentage and volume percentage, not its mass percentage.

  2. How do you calculate the mean molar mass of a gas mixture?

    Answer

    c) The sum of the products of mole fractions and molar masses. M = mtotal ÷ ntotal = Σ xi · Mi, an average weighted by mole fractions.

  3. Which value cannot be the mean molar mass of a mixture of nitrogen (28 g/mol) and carbon dioxide (44 g/mol)?

    Answer

    c) 26 g/mol. M lies between 28 and 44 g/mol; 26 g/mol is outside that range.

  4. A mixture contains 2 moles of nitrogen and 3 moles of oxygen. What is the mole fraction of oxygen? Give the result to one decimal place.

    Answer

    0.6. x(O₂) = 3 ÷ (2 + 3) = 0.6.

  5. A mixture has x(N₂) = 0.25 and x(O₂) = 0.75. What is its mean molar mass in g/mol? Use M(N₂) = 28 g/mol and M(O₂) = 32 g/mol.

    g/mol
    Answer

    31.0 g/mol. M = 0.25 · 28 + 0.75 · 32 = 7 + 24 = 31 g/mol, closer to 32, the more abundant component.

  6. Put the steps for finding the mean molar mass of a mixture from the masses of its components in order.

    Answer

    The correct order:

    1. Calculate the amounts ni = mi ÷ Mi
    2. Add the amounts to find ntotal
    3. Find the mole fractions xi = ni ÷ ntotal
    4. Calculate the sum xi · Mi

    Mole fractions require the total amount, and the weighted sum requires the mole fractions.

  7. Why is the mean molar mass of air (approximately 29 g/mol) closer to that of nitrogen (28 g/mol) than to the simple average of nitrogen and oxygen (30 g/mol)?

    A good answer

    The average is weighted by mole fractions. Nitrogen has a mole fraction of 0.78, oxygen 0.21 and argon 0.01, so nitrogen contributes most to M. The simple average would assume equal amounts of nitrogen and oxygen.

    A complete answer says that the average is weighted and uses the mole fractions of the components.

Terms

mole fraction
The ratio of the amount of a component to the total amount of substance in the mixture; xi = ni ÷ ntotal.
volume fraction
The ratio of the volume of a gas to the volume of the gas mixture under the same conditions; for gases it equals the mole fraction.
mole percentage
The mole fraction multiplied by 100.
mean molar mass
The total mass of a mixture divided by its total amount of substance; M = Σ xi · Mi.
weighted average
An average in which each value counts in proportion to its fraction of the mixture.
gas mixture
A homogeneous mixture of two or more gases, such as air.
Sources and link to the programme

From the programme: “Mole fraction, mean molar mass” (MI: Mathematics–informatics (2 hours)). Specific competences followed: 3.6, 4.6, 5.6.