Chapter 9 · SolutionsLesson 9.6TC Core curriculum (1 hour a week) · beyond your profile
Preparing aqueous solutions of given percentage and molar concentrations, including from hydrates (crystal hydrates)
How many moles are in a litre of solution
Blood glucose can be written as 90 mg/dL or 5 mmol/L. How can both be correct?
Before you read: what do you think?
How do you prepare one litre of 1 mol/L NaCl solution, given that 1 mol of NaCl has a mass of 58.5 g?
See the answer
Molar concentration is based on the volume of the final solution. Dissolve the salt in some of the water, then fill the flask to the 1 L mark. Adding a litre of water to the salt gives a different solution volume.
In Romania, blood tests give blood glucose in mg/dL, while in many other countries the same result is written in mmol/L. As a calculation example, 90 mg/dL and 5 mmol/L describe the same amount of glucose in the same volume of blood. One counts mass; the other counts particles, in moles.
One mole per litre: what molar concentration tells you
Molar concentration (cM) is the amount of dissolved substance, n, divided by the volume of the solution, Vs:
cM = n ÷ Vs
The unit is mol/L, also written M (“molar”) in exercise books: a 0.2 M solution has a concentration of 0.2 mol/L.
The amount of substance comes from the mass, n = m ÷ M, so cM = m ÷ (M · Vs). Volume is expressed in litres: 250 mL = 0.25 L. One mole of sodium chloride has a mass of 58.5 g, so a 1 mol/L solution contains 58.5 g of salt in each litre, and a 0.1 mol/L solution contains 5.85 g.
Concentration is a property of a solution, like temperature: a drop and a litre of the same 0.2 mol/L solution both have a concentration of 0.2 mol/L. Only the amount of substance in them differs: 10 mL contains 0.2 · 0.01 = 0.002 mol.
The volume of the solution
The formula uses the volume of the final solution, measured after dissolving. If 58.5 g of salt is added to one litre of water, the solution volume is no longer exactly one litre, because masses add up, while volumes do not add up exactly. To prepare a 1 mol/L solution, dissolve the salt in some of the water, then add water to the 1 L mark on a volumetric flask.
The same amount of substance gives different concentrations in different volumes. If 0.1 mol of salt is in 0.1 L of solution, the concentration is 0.1 ÷ 0.1 = 1 mol/L; in 0.5 L of solution it is 0.1 ÷ 0.5 = 0.2 mol/L. If the volume doubles, the concentration halves.
Molar concentration and ions in solution
A 0.1 mol/L sodium chloride solution has 0.1 mol/L of Na⁺ ions and 0.1 mol/L of Cl⁻ ions, because NaCl(s) → Na⁺(aq) + Cl⁻(aq) gives one ion of each. Calcium chloride dissociates to give two chloride ions:
CaCl₂(s) → Ca²⁺(aq) + 2Cl⁻(aq)
One mole of CaCl₂ gives one mole of Ca²⁺ ions and two moles of Cl⁻ ions. A 0.1 mol/L CaCl₂ solution therefore has 0.1 mol/L of Ca²⁺ and 0.2 mol/L of Cl⁻.
From percentage to mol/L
A laboratory bottle gives the percentage concentration and density, while problems ask for the molar concentration. One litre of solution has a mass of 1,000 · ρ grams, with ρ in g/mL; c% of that mass is dissolved substance. The mass of dissolved substance is md = c% · 1,000 · ρ ÷ 100 = 10 · c% · ρ grams. The amount of substance is n = md ÷ M, so:
cM = c% · ρ · 10 ÷ M
Concentrated laboratory hydrochloric acid contains 37.2% HCl and has ρ = 1.19 g/mL. Its molar mass is M(HCl) = 1 + 35.5 = 36.5 g/mol, so cM = 37.2 · 1.19 · 10 ÷ 36.5 ≈ 12.1 mol/L. The solution has approximately 12.1 moles of HCl per litre, over a hundred times as much as a 0.1 mol/L solution.
For the curious
Concentration in g/L comes from multiplying molar concentration by molar mass: for NaCl, 0.4 mol/L means 0.4 · 58.5 = 23.4 g/L.
Worked example
Salt in 500 mL of solution
Dissolve 11.7 g of sodium chloride in water and add water to make 500 mL of solution. What is its molar concentration, and what mass of salt is in 200 mL of it?
Molar mass: M(NaCl) = 23 + 35.5 = 58.5 g/mol. Amount of salt: n = 11.7 ÷ 58.5 = 0.2 mol.
Volume in litres: 500 mL = 0.5 L. Concentration: cM = 0.2 ÷ 0.5 = 0.4 mol/L.
In 200 mL = 0.2 L of solution: n = 0.4 · 0.2 = 0.08 mol, so m = 0.08 · 58.5 = 4.68 g.
Check: 200 mL is two fifths of 500 mL, and two fifths of 11.7 g is 4.68 g. A concentration of 0.4 mol/L corresponds to 23.4 g/L, less than the 58.5 g/L in a 1 mol/L solution.
In Romania
Blood glucose in mg/dL and mmol/L
The Romanian Society of Diabetes, Nutrition and Metabolic Diseases’ diabetes management guide (2021) gives fasting plasma glucose in milligrams per decilitre, with the value in mmol/L in brackets. Diabetes is diagnosed from 126 mg/dL (7 mmol/L), confirmed by a repeat test, and prediabetes between 100 and 125 mg/dL (5.6–6.9 mmol/L). Hypoglycaemia begins below 70 mg/dL (3.9 mmol/L), while values between 70 and 99 mg/dL do not fall into these categories. Glucose, C₆H₁₂O₆, has M = 6 · 12 + 12 · 1 + 6 · 16 = 180 g/mol.
One decilitre is 0.1 L, so 99 mg/dL = 990 mg/L = 0.99 g/L, and n = 0.99 ÷ 180 = 0.0055 mol/L = 5.5 mmol/L. Similarly, 70 mg/dL gives 0.70 ÷ 180 ≈ 0.0039 mol/L = 3.9 mmol/L, and 126 mg/dL gives 1.26 ÷ 180 = 0.0070 mol/L = 7.0 mmol/L. The practical rule: divide the value in mg/dL by 18 to get mmol/L.
In short
- Molar concentration is the amount of dissolved substance divided by the volume of the solution: cM = n ÷ Vs, in mol/L.
- The amount comes from the mass, n = m ÷ M, and the volume is written in litres: cM = m ÷ (M · Vs).
- The volume in the formula is that of the final solution; masses add up, volumes do not.
- Concentration does not depend on how much solution you take, while the amount of substance does: a smaller portion has the same concentration.
- For electrolyte solutions, c(ion) = the coefficient in the dissociation equation multiplied by c(substance): 0.1 mol/L CaCl₂ gives 0.2 mol/L Cl⁻.
- From percentage concentration and density: cM = c% · ρ · 10 ÷ M, with ρ in g/mL.
Common mistakes
WrongI put 58.5 g of salt in one litre of water and get a 1 mol/L solution.
RightThe solution volume will differ from one litre, because volumes do not add up exactly. Dissolve the salt in some of the water, then add water to the 1 L mark.
WrongA 0.1 mol/L CaCl₂ solution has 0.1 mol/L of chloride ions.
RightEach CaCl₂ unit gives two Cl⁻ ions, so the solution has 0.2 mol/L of Cl⁻ and 0.1 mol/L of Ca²⁺.
WrongIf I take only 10 mL of the solution, its concentration is lower.
RightThe concentration is the same in every portion of the solution; only the amount of substance in the portion decreases.
Test yourself
7 questions. For the first 6 you see the explanation at once, with the paragraph of the lesson that supports it; for the written ones you compare with a good answer.
Which volume goes into the molar concentration formula?
Answer
b) The volume of the final solution. Volumes do not add up exactly, and concentration refers to the resulting solution.
What is the concentration of Cl⁻ ions in a 0.1 mol/L CaCl₂ solution?
Answer
c) 0.2 mol/L. CaCl₂(s) → Ca²⁺(aq) + 2Cl⁻(aq) gives two chloride ions for each formula unit.
You take 10 mL from a 0.2 mol/L solution. What is the concentration of the portion?
Answer
a) 0.2 mol/L. The concentration is the same in every portion; only the amount of substance decreases.
Dissolve 5.85 g of NaCl in water and add water to make 200 mL of solution. What is its molar concentration, in mol/L? Take M(NaCl) = 58.5 g/mol.
mol/LAnswer
0.50 mol/L. n = 5.85 ÷ 58.5 = 0.1 mol and Vs = 0.2 L, so cM = 0.1 ÷ 0.2 = 0.5 mol/L.
Calculation example: a blood glucose value is 90 mg/dL. How many mmol/L of glucose is that? Take M(glucose) = 180 g/mol.
mmol/LAnswer
5.0 mmol/L. 90 mg/dL = 0.9 g/L, and 0.9 ÷ 180 = 0.005 mol/L = 5 mmol/L.
Put the steps for calculating molar concentration from the mass of substance in order.
Answer
The correct order:
- Find M of the substance from the atomic masses
- Calculate n = m ÷ M
- Write the solution volume in litres
- Divide n by Vs
First find the molar mass, then the amount of substance; finally divide by the solution volume in litres.
A pupil dissolves 11.7 g of NaCl (M = 58.5 g/mol) in 1 L of water and says the result is a 0.2 mol/L solution. What does the pupil not know for certain, and how should the solution be prepared?
A good answer
The pupil does not know the final solution volume, because volumes do not add up exactly. Dissolve the salt in some water in a beaker, transfer the solution to a volumetric flask and add water to the 1 L mark. Then n = 0.2 mol in 1 L gives 0.2 mol/L.
A complete answer says that the solution volume is used and describes filling to the mark.
Terms
- molar concentration
- The amount of dissolved substance divided by the volume of solution, cM = n ÷ Vs, in mol/L.
- amount of substance
- The quantity measured in moles, n = m ÷ M.
- molar mass
- The mass of one mole of substance, in g/mol.
- density
- The mass of a solution divided by its volume, ρ = m ÷ V.
- volumetric flask
- A laboratory flask with a mark on its neck that measures an exact volume of solution.
Sources and link to the programme
- OpenStax – Chemistry 2e, 3.3 Molarity – the definition of molarity, moles of dissolved substance per litre of solution, and its calculation from mass and volume
- OpenStax – Chemistry 2e, 3.4 Other Units for Solution Concentrations – concentrated hydrochloric acid: 37.2% by mass, 1.19 g/mL
- Societatea Română de Diabet, Nutriție și Boli Metabolice – Ghid de management al diabetului zaharat (2021) – ADA diagnostic criteria: fasting plasma glucose from 126 mg/dL (7 mmol/L), after at least eight hours without food (table 1.1); repeat testing for confirmation (table 1.1 note); prediabetes 100–125 mg/dL (5.6–6.9 mmol/L), table 20.1; hypoglycaemia below 70 mg/dL (3.9 mmol/L), table 1.8
- PubChem – Glucose – the formula C₆H₁₂O₆ and molar mass of glucose, 180.16 g/mol
From the programme: “Preparing aqueous solutions of given percentage and molar concentrations, including from hydrates (crystal hydrates)”; “Molar concentration of a solution”; “Preparing aqueous solutions of given percentage and molar concentrations” (TC: Core curriculum (1 hour a week)). Specific competences followed: 1.5, 3.5, 5.5.