Chemistry 9 RO
A chart of 11 bars, the successive ionisation energies of sodium, from 5.14 eV to 1,648.70 eV, on a logarithmic scale. The bars are of three kinds: solid (experimental values), hatched (semi-empirical) and with a dotted outline (calculated). Jumps appear between the first and the second electron and between the ninth and the tenth. At top left, a diagram of the sodium atom, with shells K, L and M.

The electron structure of the atom. Metallic character. Non-metallic character

Chapter 4

The atom – where the electrons sit

Where do the electrons sit in an atom?

From an atom of sodium you can tear electrons one after another, and each one needs a different energy. The series of these energies shows how the electrons are grouped in the atom. Start with a prediction, then remove electrons.

The first electron of sodium needs 5.14 eV

An atom of gaseous sodium has 11 electrons. Tearing off the first needs 5.14 eV, that is 496 kJ/mol (one electronvolt per atom is 96.485 kJ per mole of atoms).

The bar in the picture has a circle above it: the mark of an experimental value. The scale is logarithmic: each numbered line is ten times higher than the one before.

How much does the second electron need?

The second electron needs 9.2 times more

The second bar rises to 47.29 eV (4,562 kJ/mol), against 5.14 eV for the first. After the first electron the atom has become the ion Na⁺, with 10 electrons; after the second it is Na²⁺, with nine electrons.

On a logarithmic scale, a jump of 9.2 times takes up almost a whole line of the grid, which means a factor of ten. The numbers in the white bubble and in the reading boxes give the real size.

The second electron is taken from a full shell close to the nucleus. Its value is experimental too.

The 11 electrons split into groups of 1, 8 and 2

Remove them all. After the first jump, the next eight electrons need between 47.29 and 299.86 eV, with no other big jump. The tenth needs 1,465.10 eV, 4.9 times more than the ninth.

The colours and brackets show the groups: shell M with 1, shell L with 8, shell K with 2. The groups are part of the diagram; the jump is in the values.

NIST states the kind of each value. Solid bar and circle: experimental value. Hatched bar, diamond and square brackets: semi-empirical, deduced from experimental values by interpolation or other methods. Dotted outline, triangle and round brackets: calculated. For sodium, three are experimental, five semi-empirical and three calculated.

The jump moves one step along with each element

Choose an element. The first jump comes at magnesium after electron 2 (5.3 times), aluminium after electron 3 (4.2 times), silicon after electron 4 (3.7 times). Its place is the number of electrons in the outer shell.

The second jump, towards shell K, comes after electron Z − 2. The last three values of each element are calculated, not experimental: NIST has no values from spectra for them.

The place of the first jump is the number of valence electrons

The picture shows all eight elements. Each row is an element, each column an electron torn off, the colour shows the energy (warmer, more) and the shape shows the kind of value.

The solid white line comes after the valence electrons: Na 1, Mg 2, Al 3, Si 4, P 5, S 6, Cl 7, Ar 8. The dotted line separates shell L from shell K. Tap a cell to see its value.

For the main-group elements, the number of valence electrons is the group number for groups 1 and 2 and the group number minus ten for groups 13–18.

The first jump rests on experimental values for six of the eight elements, the second on calculated ones

Only the experimental values are left bright. For six elements of the eight, both values beside the first jump are experimental. For phosphorus and argon, one of them is semi-empirical: P: 65.03 → 220.43 eV; Ar: 143.46 → 422.60 eV.

The second jump, towards shell K, has calculated values on both sides for all eight elements. Here the jump comes out of calculation, not out of spectra.

Ionisation energies do not show the shells directly; they show a series with jumps, and the shells are the explanation of it. The more experimental values lie on both sides of a jump, the better the explanation is supported.

Within one period, the first energies do not rise in a straight line

For mathematics–informatics and natural sciences

The first energies of the elements from sodium to argon, in eV: Na 5.14; Mg 7.65; Al 5.99; Si 8.15; P 10.49; S 10.36; Cl 12.97; Ar 15.76. All are experimental. Aluminium (5.99) is below magnesium (7.65), and sulfur (10.36) below phosphorus (10.49).

The explanation needs subshells: in aluminium the electron torn off is a 3p one, less tightly held than 3s, and in sulfur, in the 3p⁴ subshell, two electrons in the same box repel each other and one leaves more easily. Subshells are a model; the dips are in the values.

The lesson on orbitals and subshells

Now you explain

One element has the first jump of its ionisation energies after the fourth electron. Look through the rows in the picture and find it.

Say, in a few sentences, which element it is, how many valence electrons it has and between which two values the jump lies.

Compare with an answer

It is silicon. The first jump comes after the fourth electron: from 45.14 eV to 166.77 eV, that is 3.7 times. Silicon has four valence electrons, the configuration 2, 8, 4, and is in group 14.

The lesson on electron shells · The lesson on the configurations from hydrogen to argon

NIST values and diagram. Values from the NIST database (ver. 5.12, queried on 16 November 2026), of three kinds, which NIST marks for each value: experimental (solid bar, circle; values evaluated from measured spectra), semi-empirical (hatched bar, diamond, in square brackets: deduced from experimental values by interpolation, extrapolation or other semi-empirical methods) and calculated (dotted outline, triangle, in round brackets: from theoretical calculation, not from evaluated experimental data). Of the 116 values, 33 are experimental, 59 semi-empirical and 24 calculated. The first jump has experimental values on both sides for six of the eight elements; the second has calculated values on both sides for all eight. The energy is for isolated atoms or ions in the gas state; kJ/mol is calculated from eV with 1 eV = 96.485 kJ/mol. The atom on the left is a diagram of shells: it shows how many electrons are in each shell, not their real position, and electrons do not circle on rings. Atoms and ions have no colour: they are drawn enormously enlarged.

Sources and credits. NIST Atomic Spectra Database (ver. 5.12), “Ground States and Ionization Energies”, A. Kramida, Yu. Ralchenko, J. Reader and NIST ASD Team (2024), source, DOI 10.18434/T4W30F, queried on 16 November 2026; a work of the US government, public domain. Elementary charge and Avogadro number: exact values from the International System of Units, NIST CODATA.

The same data, as a table
The successive ionisation energies, in eV, NIST values. No mark: experimental. In square brackets [ ]: semi-empirical. In round brackets ( ): calculated.
Electron removedNaMgAlSiPSClAr
15.147.655.998.1510.4910.3612.9715.76
247.2915.0418.8316.35[19.77]23.3423.8127.63
3[71.62]80.1428.4533.4930.20[34.86][39.80][40.73]
4[98.94][109.27]119.9945.1451.44[47.22][53.24][59.58]
5138.40[141.33][153.83]166.7765.0372.59[67.68][74.84]
6[172.23][186.76][190.49][205.28][220.43]88.05[96.94]91.29
7[208.50][225.02][241.76][246.57][263.57]280.95114.20[124.41]
8[264.19][265.92][284.64][303.59][309.60]328.79348.31[143.46]
9(299.86)[327.99][330.21][351.28][372.31][379.84]400.85[422.60]
10(1,465)(367.49)[398.65][401.38][424.40][447.70][456.70][479.76]
11(1,649)(1,762)(442.00)[476.27][479.44][504.55][530.00][540.40]
12(1,963)(2,086)(523.41)[560.62][564.41][591.58][619.00]
13(2,304)(2,438)(611.74)[651.96][656.30][685.50]
14(2,673)(2,817)(706.99)[750.23][755.13]
15(3,070)(3,224)(809.20)[855.50]
16(3,494)(3,658)(918.38)
17(3,946)(4,121)
18(4,426)
For each element: the first electron in kJ/mol, how many values are experimental / semi-empirical / calculated, and the two jumps.
ElementFirst electronValues exp. / semi-emp. / calc.First jumpSecond jump
Na, sodiumNa⁺: 496 kJ/mol3 / 5 / 3after electron 1: ×9.2after electron 9: ×4.9
Mg, magnesiumMg⁺: 738 kJ/mol3 / 6 / 3after electron 2: ×5.3after electron 10: ×4.8
Al, aluminiumAl⁺: 578 kJ/mol4 / 6 / 3after electron 3: ×4.2after electron 11: ×4.7
Si, siliconSi⁺: 787 kJ/mol5 / 6 / 3after electron 4: ×3.7after electron 12: ×4.7
P, phosphorusP⁺: 1,012 kJ/mol4 / 8 / 3after electron 5: ×3.4after electron 13: ×4.6
S, sulfurS⁺: 1,000 kJ/mol6 / 7 / 3after electron 6: ×3.2after electron 14: ×4.6
Cl, chlorineCl⁺: 1,251 kJ/mol5 / 9 / 3after electron 7: ×3.0after electron 15: ×4.5
Ar, argonAr⁺: 1,521 kJ/mol3 / 12 / 3after electron 8: ×2.9after electron 16: ×4.5

Lessons of the chapter

Lessons: 2 lessons TC, 2 lessons MI, 1 lesson SN. The badge of each lesson says which profile it belongs to.

Which profile are you on?

  1. 4.1What changes when you add or remove a particle from an atom TC · beyond your profileElectron configuration by shells for the first 20 chemical elements in the periodic tableAre a sodium atom and a Na⁺ ion the same element? What about two chlorine atoms that weigh different amounts?
  2. 4.2How many electrons fit in a shell: the first 20 elements TC · beyond your profileElectron configuration by shells for the first 20 chemical elements in the periodic tableSodium loses one electron easily, but the second takes over nine times as much energy. What does that tell you about how the electrons are arranged?
  3. 4.3Where are you likely to find the electron: orbitals and subshells MI · beyond your profileOrbitals, subshells; electron occupation of shells and subshellsThe second shell holds eight electrons. Are all eight bound equally tightly to the nucleus?
  4. 4.4How to write the configuration of any element from hydrogen to argon MI · beyond your profileElectron configurations of chemical elements in periods 1, 2 and 3 of the periodic tableYou are told that an atom has three unpaired electrons in its outer shell. How do you find the element?
  5. 4.5Why 4s fills before 3d, and chromium and copper are exceptions SN · beyond your profileElectron configurations of chemical elements in periods 1, 2, 3 and 4 of the periodic tableIn argon, the third shell holds 8 electrons, although it has room for 18. Where does the 19th electron, in potassium, go?

Test tomorrowten questions from chapter 4For the class: projector, sheets, shared test