Chemistry 9 RO

Chapter 3 · Redox and cellsLesson 3.3MI Mathematics–informatics (2 hours) · beyond your profile

Oxidation, reduction; reducing agent, oxidising agent

Hydrogen peroxide restores a painting’s white, but decolourises permanganate: oxidising and reducing agents

Why is a substance called an oxidising agent the one that is reduced?

Test tomorrowten questions from chapter 3

Before you read: what do you think?

Hydrogen peroxide restores the white of a darkened painting because it oxidises black lead sulfide. The teacher adds hydrogen peroxide to a purple solution of acidified potassium permanganate: the purple disappears and oxygen is released. What role does hydrogen peroxide play in the second reaction?

See the answer

Its role is the opposite. Mn in permanganate has N.O. +7, its highest, so it can only be reduced (to Mn²⁺, colourless in solution). Hydrogen peroxide gives it electrons: the oxygen in it goes from −1 to 0 and O₂ is released. The same substance can be an oxidising or a reducing agent, depending on its partner.

Lead white in an old painting or drawing darkens over time because hydrogen sulfide in the air turns it into black lead sulfide, PbS. Conservators can restore the white with hydrogen peroxide, which turns PbS into white lead sulfate, PbSO₄. The treatment does not always work, and in one case described in the source it had to be repeated the following year. Here hydrogen peroxide is the oxidising agent, and lead sulfide is the reducing agent.

The oxidising agent is reduced, the reducing agent is oxidised

The reducing agent is the species that gives up electrons and is therefore oxidised: the oxidation number of an element in it rises. The oxidising agent is the species that accepts electrons and is reduced: the oxidation number of an element in it falls. The name says what the agent does to its partner (the oxidising agent oxidises its partner), while the verb says what happens to the agent itself. That is why the oxidising agent is the one that is reduced.

Zn + 2HCl → ZnCl₂ + H₂

Zinc goes from 0 to +2: it is the reducing agent. Hydrogen in HCl goes from +1 to 0: hydrochloric acid is the oxidising agent. The agent is the whole species, not the free element: in Zn + Cu²⁺ → Zn²⁺ + Cu, the oxidising agent is the Cu²⁺ ion; the Cu atoms in the product are not the oxidising agent.

CuO + H₂ → Cu + H₂O

Here CuO is the oxidising agent (copper goes from +2 to 0), and H₂ is the reducing agent (hydrogen goes from 0 to +1).

For the curious

Roles are assigned from oxidation numbers even when whole electrons do not pass from one atom to another. In H₂ + Cl₂ → 2HCl, the HCl molecule has a polar covalent bond: electrons are drawn towards chlorine, but are not fully given up. By convention, hydrogen goes from 0 to +1 and is the reducing agent, while chlorine goes from 0 to −1 and is the oxidising agent.

Zn Cu²⁺ 2e⁻ reducing agent gives up 2e⁻ N.O. 0 → +2 is oxidised oxidising agent accepts 2e⁻ N.O. +2 → 0 is reduced Zn²⁺ Cu Zn + Cu²⁺ → Zn²⁺ + Cu
Figure 1The reducing agent, Zn, gives up electrons and is oxidised; the oxidising agent, the Cu²⁺ ion, accepts them and is reduced. The Cu atom in the product is no longer the oxidising agent.

Common oxidising and reducing agents

Common oxidising agents: O₂ (oxygen goes from 0 to −2), Cl₂ (from 0 to −1), KMnO₄ (Mn from +7 to +2 or +4), K₂Cr₂O₇ (Cr from +6 to +3), HNO₃ (N from +5 to +4 or +2) and H₂O₂ (O from −1 to −2). Common reducing agents: active metals (Na, Mg, Al, Zn), carbon C, carbon monoxide CO and hydrogen H₂.

The role can be predicted from the oxidation number. An element at its maximum N.O. can only be reduced, so its species is an oxidising agent (Mn in KMnO₄, N in HNO₃). An element at its minimum N.O. can only be oxidised, so its species is a reducing agent (S in H₂S, Cl in Cl⁻). At an intermediate N.O. an element can do either, and its role depends on its partner.

The oxygen in hydrogen peroxide is at −1, between 0 and −2. With lead sulfide it is an oxidising agent, in the reaction in the painting:

PbS + 4H₂O₂ → PbSO₄ + 4H₂O

Sulfur goes from −2 to +6 (giving up 8 electrons), while the eight oxygen atoms in four H₂O₂ molecules go from −1 to −2 (accepting 8 electrons). With acidified permanganate, hydrogen peroxide is a reducing agent (a demonstration done by the teacher):

2KMnO₄ + 5H₂O₂ + 3H₂SO₄ → K₂SO₄ + 2MnSO₄ + 5O₂ + 8H₂O

Sulfur dioxide (S at +4) also has two roles: oxidising agent in 2H₂S + SO₂ → 3S + 2H₂O, reducing agent in Cl₂ + SO₂ + 2H₂O → H₂SO₄ + 2HCl.

Oxygen N.O. 0 −1 −2 O₂ H₂O₂ H₂O H₂O₂ as reducing agent with acidified KMnO₄: oxygen is oxidised to O₂ Intermediate N.O.: two roles H₂O₂ as oxidising agent with PbS (darkened painting): oxygen is reduced to H₂O up: oxidation; down: reduction
Figure 2In H₂O₂ oxygen is at −1, between 0 and −2, so it can go up or down: with PbS hydrogen peroxide is an oxidising agent, with acidified permanganate it is a reducing agent.

Disproportionation: one substance as oxidising and reducing agent at once

Chlorine reacts with sodium hydroxide and with water. In both reactions half the chlorine atoms are reduced and the other half are oxidised:

Cl₂ + 2NaOH → NaCl + NaClO + H₂O

Cl₂ + H₂O ⇌ HCl + HClO

Chlorine goes from 0 to −1 (in NaCl and HCl) and from 0 to +1 (in NaClO and HClO). A reaction like this is called disproportionation. Sodium hypochlorite NaClO, in laundry bleach, is a strong oxidising agent. Never mix bleach with acids or other cleaning products: on contact with acids, hypochlorite decomposes and releases toxic gases, including chlorine.

Worked example

The oxidising agent, reducing agent and electrons in the reaction Fe₂O₃ + 3CO

In the reaction Fe₂O₃ + 3CO → 2Fe + 3CO₂, identify the oxidising and reducing agents and calculate how many moles of electrons pass when 16 g of Fe₂O₃ reacts.

Oxidation numbers: iron goes from +3 to 0, so each iron atom accepts 3 electrons and is reduced; carbon goes from +2 to +4, so each carbon atom gives up 2 electrons and is oxidised; oxygen stays at −2. The oxidising agent is Fe₂O₃, the reducing agent is CO.

Balance: 2 Fe atoms accept 2 · 3 = 6 electrons, and 3 C atoms give up 3 · 2 = 6 electrons. The totals match, so the coefficients are correct.

M(Fe₂O₃) = 2 · 56 + 3 · 16 = 160 g/mol, so n = 16 ÷ 160 = 0.1 mol. For each Fe₂O₃ formula unit, 6 electrons pass, so 0.1 · 6 = 0.6 moles of electrons.

Check: 0.1 mol Fe₂O₃ contains 0.2 mol Fe; 0.2 · 3 = 0.6 moles of electrons accepted, the same result.

In Romania

Chlorine in tap water

Bucharest drinking water contains residual chlorine, the chlorine left after disinfection. In January 2019, Apa Nova announced that measurements had not exceeded 0.4 mg/L, within legal limits. Ordinance 7/2023 on the quality of water intended for human consumption, which replaced Law 458/2002, requires free residual chlorine to be between 0.1 and 0.5 mg/L in the distribution network.

The reaction of chlorine with water, Cl₂ + H₂O ⇌ HCl + HClO, is a disproportionation, and hypochlorous acid HClO is an oxidising agent. The amount left in the water is small and is measured, and the law sets a permitted range for it.

In short

  1. The reducing agent gives up electrons and is oxidised, and the oxidation number of an element in it rises. The oxidising agent accepts electrons and is reduced, and the oxidation number falls.
  2. The agent is the whole species (the Cu²⁺ ion, not the Cu atoms in the product). In Zn + 2HCl → ZnCl₂ + H₂, Zn is the reducing agent and HCl is the oxidising agent.
  3. Common oxidising agents: O₂, Cl₂, KMnO₄, K₂Cr₂O₇, HNO₃, H₂O₂. Common reducing agents: active metals, C, CO, H₂.
  4. An element at its maximum N.O. is only an oxidising agent, at its minimum N.O. only a reducing agent, and at an intermediate N.O. can be both (H₂O₂, SO₂).
  5. In disproportionation the same element is both an oxidising and a reducing agent: Cl₂ + 2NaOH → NaCl + NaClO + H₂O.
WorksheetMy notebook

Common mistakes

  • WrongThe oxidising agent is the substance that is oxidised.

    RightThe oxidising agent oxidises its partner. To do that, it accepts electrons and is therefore reduced.

  • WrongHydrogen peroxide is always an oxidising agent.

    RightWith PbS it is an oxidising agent, but with acidified permanganate it is a reducing agent: its oxygen is at −1, an intermediate N.O.

  • WrongIn Zn + Cu²⁺ → Zn²⁺ + Cu, the oxidising agent is copper.

    RightThe oxidising agent is the Cu²⁺ ion, which accepts electrons. The copper metal in the product is the result of reduction, not the oxidising agent.

Test yourself

7 questions. For the first 6 you see the explanation at once, with the paragraph of the lesson that supports it; for the written ones you compare with a good answer.

  1. In the reaction Zn + 2HCl → ZnCl₂ + H₂, the oxidising agent is:

    Answer

    b) HCl, because its hydrogen goes from +1 to 0. Hydrogen in HCl accepts electrons (its N.O. falls from +1 to 0), so hydrochloric acid is the oxidising agent. Zinc gives up electrons and is the reducing agent.

  2. Which species can only be an oxidising agent, never a reducing agent?

    Answer

    c) H₂SO₄ (S at +6). Sulfur in H₂SO₄ is at its maximum N.O. (+6), so it can only be reduced. SO₂ and H₂O₂ have intermediate N.O. values, while H₂S has a minimum N.O. and can only be oxidised.

  3. What role does chlorine play in the reaction Cl₂ + 2NaOH → NaCl + NaClO + H₂O?

    Answer

    a) Both oxidising and reducing agent. Some chlorine atoms go from 0 to −1 (they are reduced), and the others go from 0 to +1 (they are oxidised). This is disproportionation.

  4. How many moles of electrons do the iron atoms accept when 32 g of Fe₂O₃ reacts completely in Fe₂O₃ + 3CO → 2Fe + 3CO₂? Given M(Fe₂O₃) = 160 g/mol.

    mol
    Answer

    1.2 mol. n(Fe₂O₃) = 32 ÷ 160 = 0.2 mol; for each Fe₂O₃ formula unit, 6 electrons pass, so 0.2 · 6 = 1.2 mol.

  5. What mass of pure hydrogen peroxide, in grams, is needed to oxidise 23.9 g of lead sulfide completely in the reaction PbS + 4H₂O₂ → PbSO₄ + 4H₂O? Given M(PbS) = 239 g/mol and M(H₂O₂) = 34 g/mol.

    g
    Answer

    13.6 g. n(PbS) = 23.9 ÷ 239 = 0.1 mol; 4 moles of H₂O₂ react with 1 mole of PbS, so n = 0.4 mol and m = 0.4 · 34 = 13.6 g.

  6. Oxidising or reducing agent in common reactions? Sort each species.

    Answer

    Usually an oxidising agent: O₂; Cl₂; KMnO₄.

    Usually a reducing agent: Zn; H₂; CO.

    O₂, Cl₂ and KMnO₄ readily accept electrons (they are reduced); active metals, H₂ and CO give them up (they are oxidised).

  7. Explain why hydrogen peroxide is an oxidising agent with PbS but a reducing agent with acidified KMnO₄. Use oxidation numbers.

    A good answer

    Oxygen in H₂O₂ has N.O. −1, intermediate between −2 and 0. With PbS, oxygen goes from −1 to −2: it accepts electrons and is reduced, so H₂O₂ is the oxidising agent, while sulfur is oxidised from −2 to +6. With KMnO₄, Mn is at +7, its maximum N.O., so it is reduced; oxygen in H₂O₂ goes from −1 to 0 (O₂ is released): it gives up electrons, so H₂O₂ is the reducing agent.

    A complete answer links the role to the intermediate N.O. and shows the direction of the oxygen N.O. change in both reactions.

Terms

oxidising agent
The species that accepts electrons and is reduced; the oxidation number of an element in it falls.
reducing agent
The species that gives up electrons and is oxidised; the oxidation number of an element in it rises.
disproportionation
A reaction in which the same element in a species is oxidised and reduced at the same time.
oxidation number
A signed whole number assigned by convention to an atom in a chemical species to count electrons given up or accepted.
free residual chlorine
Chlorine left in drinking water after disinfection; the law sets a permitted range for it, in mg/L.
sodium hypochlorite
The salt NaClO, a strong oxidising agent and the active ingredient in laundry bleach.
Sources and link to the programme

From the programme: “Oxidation, reduction; reducing agent, oxidising agent”; “Reducing agent, oxidising agent” (MI: Mathematics–informatics (2 hours)). Specific competences followed: 2.2, 3.1, 3.2, 4.2, 5.2.