Chapter test · common core
Biology test, grade 9: chapter 1, Investigating life
Which of these statements is an observation?
- Plant A grew taller because it got more light.
- Plant A is 18 cm tall and plant B is 12 cm.
- Plant B was watered too little.
- Plants grow better by the window.
What was the job of the gauze-covered jars in Redi’s experiment?
- They kept the meat fresh for longer
- They showed that maggots appear even without air
- They let air in and kept flies out, to see whether air produces the maggots
- They were the jars in which the most maggots formed
Which of the sentences below is a scientific hypothesis?
- Maggots appear because of a force that cannot be detected.
- After three days, maggots appeared on the meat left outside.
- The maggots on meat come from eggs laid by flies.
- Rotten meat smells bad.
At Fundulea, in 2011–2015, the plots given 120 kg of nitrogen and 80 kg of P₂O₅ (phosphorus oxide) per hectare yielded 4,440 kg of wheat per hectare, and the control plots 1,210 kg per hectare. By how many kilograms per hectare was the harvest of the fertilised plots larger?
Answer: kg/ha
In the experiment on temperature and bean germination, sort each item.
Write each card under the group it belongs to.
Independent variableDependent variableControlled variableAmount of water in the cotton woolNumber of beans germinated after five daysNumber of beans in each containerFridge or room temperatureBean variety
In an experiment, the amount of water the seedlings get is changed, and after two weeks their height is measured. What is the height?
- The independent variable
- The dependent variable
- A controlled variable
- The control group
Put in order the steps by which measurements become a communicated result.
Write the number of the step in the box: 1 for the first, 6 for the last.
- Enter the values in a table
- Measure and record each value, with its unit and the sample code
- Write the conclusion and the sources of error
- Present the report
- Draw the graph
- Work out the mean for each condition
At 30 °C, the roots of two beans are 25 mm and 29 mm long, and the third bean went mouldy, so its root could not be measured. What is the correct mean, in millimetres?
Answer: mm
Sort the parts of the microscope: mechanical or optical?
Write each card under the group it belongs to.
Mechanical partsOptical partsThe nosepieceThe 40× objectiveThe coarse focus knobThe condenserThe stage with clipsThe eyepiece
Put in order the steps for making a wet mount of onion epidermis and observing it.
Write the number of the step in the box: 1 for the first, 6 for the last.
- Use tweezers to peel the skin from the inner face of an onion layer
- Lower the coverslip at an angle and let it down slowly
- Put a drop of water on a clean slide
- Observe first with the lowest-power objective and the coarse focus knob
- Move to 40× and focus only with the fine focus knob
- Spread the skin out in the drop of water
Answer key: chapter 1
Page for the teacher. Each question is worth 1 mark if the answer is entirely correct; for the ordering and sorting questions the mark is given only for the complete answer. For a grade, the teacher sets the scheme.
b) Plant A is 18 cm tall and plant B is 12 cm. The measured heights describe what can be seen. The other options propose a reason or a general rule and would need to be tested. (lesson 1.1)
c) They let air in and kept flies out, to see whether air produces the maggots. The gauze separated the two factors: air got in, flies did not. The meat stayed free of maggots, so air was not the cause. (lesson 1.1)
c) The maggots on meat come from eggs laid by flies. The hypothesis about flies’ eggs proposes an explanation and can be disproved: if maggots also appeared on covered meat, it would be wrong. The first option cannot be tested, and the other two are observations. (lesson 1.1)
3,230 kg/ha (a deviation of up to 0 is accepted). The difference from the control: 4,440 − 1,210 = 3,230 kg per hectare. It shows how much of the harvest is due to fertilisation. (lesson 1.2)
Independent variable: Fridge or room temperature. Dependent variable: Number of beans germinated after five days. Controlled variable: Amount of water in the cotton wool; Bean variety; Number of beans in each container. Only the temperature is changed; germination is measured; everything else is kept the same in every container. (lesson 1.2)
b) The dependent variable. The height is the measured result. The amount of water is the independent variable, and the light, the soil and the variety are controlled variables. (lesson 1.2)
The correct order: 1. Measure and record each value, with its unit and the sample code; 2. Enter the values in a table; 3. Work out the mean for each condition; 4. Draw the graph; 5. Write the conclusion and the sources of error; 6. Present the report. The raw data come first; the table organises them; the mean sums them up; the graph shows the trend; the conclusion interprets them; the report makes them checkable. (lesson 1.3)
27 mm (a deviation of up to 0 is accepted). Take the mean of the measured values: (25 + 29) ÷ 2 = 27 mm. The mouldy bean is “missing”; if it were entered as 0, the mean would come out wrongly as 18 mm. (lesson 1.3)
Mechanical parts: The nosepiece; The stage with clips; The coarse focus knob. Optical parts: The eyepiece; The condenser; The 40× objective. The mechanical parts support and move; the optical parts contain the lenses and the pieces that direct the light. (lesson 1.4)
The correct order: 1. Put a drop of water on a clean slide; 2. Use tweezers to peel the skin from the inner face of an onion layer; 3. Spread the skin out in the drop of water; 4. Lower the coverslip at an angle and let it down slowly; 5. Observe first with the lowest-power objective and the coarse focus knob; 6. Move to 40× and focus only with the fine focus knob. The slide and water are prepared before the material; the coverslip goes on at an angle so that no bubbles are left; observation goes from low to high magnification. (lesson 1.4)