Chemistry 9 RO

Chapter 9 · SolutionsLesson 9.3TC Core curriculum (1 hour a week) · beyond your profile

Heat effects of dissolving in water

Why one solution warms and another cools as substances dissolve

An instant cold pack gets cold in seconds, while caustic soda added to water warms the beaker. Why does dissolving have different effects for different substances?

Test tomorrowten questions from chapter 9

Before you read: what do you think?

A disposable cold pack has a sachet of solid salt and water in another compartment. When the sachet breaks, the salt dissolves and the pack gets cold in seconds. Where does the cold come from?

See the answer

Some salts dissolve endothermically: separating their ions from the crystal takes more energy than hydration releases, and the difference comes from the water and surroundings. The temperature falls without any ice or evaporation.

In the laboratory, the teacher dissolves sodium hydroxide in a beaker of water. The thermometer rises quickly and the beaker gets warm. In another beaker, the teacher dissolves ammonium nitrate and the thermometer falls. Both substances dissolve, with opposite effects on temperature.

The thermometer rises in one beaker and falls in anotherWhat you see

In a laboratory demonstration, sodium hydroxide is dissolved in a beaker of water with a thermometer: the temperature rises quickly and the beaker gets warm. In another beaker, ammonium nitrate is dissolved: the temperature falls and the beaker feels cold. The demonstrations are done by the teacher and must not be repeated at home. Sodium hydroxide (caustic soda) burns skin, and ammonium nitrate is an oxidising substance.

A substance that dissolves and warms the solution does so exothermically: it releases heat. One that cools the solution dissolves endothermically: it absorbs heat from the solution and surroundings. The heat exchanged when one mole of a substance dissolves is called the heat of solution, written ΔH, in kJ/mol. A negative ΔH means dissolving is exothermic; a positive ΔH means it is endothermic.

At 25 °C, in a large amount of water, the heats of solution are: NaOH −44.5 kJ/mol, NaCl +3.9 kJ/mol, NH₄Cl +14.8 kJ/mol, NH₄NO₃ +25.7 kJ/mol and KNO₃ +34.9 kJ/mol. Table salt cools the water very little because its value is small.

Calcium chloride also dissolves exothermically. Sulfuric acid releases a lot of heat when mixed with water, so acid is poured into water, never water into acid. Diluting sulfuric acid is a demonstration done by the teacher, wearing protective equipment.

Breaking the crystal takes energy; hydration releases itWhat the particles do

Dissolving an ionic crystal has two steps. First, ions separate from the lattice: the attractions between them are broken, and this step absorbs energy. Second, water molecules surround the free ions through attraction between charges and polar molecules; this step releases energy. The first step also absorbs energy because some hydrogen bonds between water molecules break to make room for the ions.

The heat effect is the balance between the two steps. If hydration releases more energy than the first step absorbs, the solution warms up, as with NaOH. If the first step absorbs more energy than hydration releases, the solution cools down, as with NH₄NO₃ and KNO₃.

Endothermic dissolving still happens spontaneously because particles spread among the water molecules and disorder increases. The sign of ΔH shows only the direction of the temperature change; it does not tell you whether a substance dissolves.

For the curious

Gases can also release heat when they dissolve. Hydrogen chloride gas, HCl, releases 74.8 kJ/mol when it dissolves in water, almost three times as much as NH₄NO₃ absorbs.

energyNaOHΔH = −44.5 kJ/molcrystal + waterfree ionshydrated ions12solution warmsNH₄NO₃ΔH = +25.7 kJ/molcrystal + waterfree ionshydrated ions12solution cools1 lattice breaks, water separates: energy absorbed2 hydration: energy released
Figure 1Compare the final level with the starting level: for NaOH hydration releases more energy than breaking the lattice and separating water molecules takes, and the solution warms; for NH₄NO₃ separation takes more and the solution cools. Schematic: arrow lengths are not to scale. Both dissolving demonstrations are done by the teacher.

How the heat effect is writtenHow it is written

The heat of solution is written beside the equation for dissolving, with its sign:

NaOH(s) → Na⁺(aq) + HO⁻(aq), ΔH = −44.5 kJ/mol

NH₄NO₃(s) → NH₄⁺(aq) + NO₃⁻(aq), ΔH = +25.7 kJ/mol

For n mol of a substance dissolved in plenty of water, the heat exchanged is Q ≈ n · |ΔH|. The amount of substance is found from the mass, using n = m ÷ M. The sign of ΔH shows the direction: minus means dissolving releases heat and the solution warms; plus means dissolving absorbs heat and the solution cools.

What the thermometer shows and what it cannot show

Heat of solution is given per mole, not in degrees, because the same amount of heat warms a large amount of water less. The temperature of the solution also depends on the amount of water, the vessel and heat exchange with the air.

An instant cold pack uses endothermic dissolving: the ammonium nitrate in it absorbs heat as it dissolves. Do not open the pack, because ammonium nitrate is an oxidising substance that supports combustion.

Heat of solution at 25 °C, in kJ/molexothermic: warmsendothermic: coolsNaOH−44.5NaCl+3.9NH₄Cl+14.8NH₄NO₃+25.7KNO₃+34.90
Figure 2Each bar shows energy per mole, to scale: NaOH warms the solution, the other four cool it. The table salt bar is shortest, so the salt water barely cools.

Worked example

How much heat does 8.0 g of ammonium nitrate absorb?

8.0 g of ammonium nitrate dissolves in water. How much heat is absorbed? ΔH = +25.7 kJ/mol.

Molar mass: M(NH₄NO₃) = 14 + 4 · 1 + 14 + 3 · 16 = 80 g/mol. Amount of substance: n = 8.0 ÷ 80 = 0.1 mol.

Heat absorbed: Q ≈ n · ΔH = 0.1 · 25.7 = 2.57 kJ ≈ 2.6 kJ. ΔH is positive, so the solution cools.

Check: for the same amount, 0.1 mol of NaOH would release 0.1 · 44.5 = 4.45 kJ, more heat than ammonium nitrate absorbs, but with the opposite sign.

In Romania

Salt on winter roads

In the winter of 2020–2021, the National Road Infrastructure Administration Company (CNAIR) used over 300,000 tonnes of salt for snow clearance, and standard AND 525/2013 specifies salt for roads. On 2 December 2016, between 5:30 and 12:00, 422 vehicles spread 1,389 tonnes of anti-skid material and 1,000 litres of calcium chloride.

Salt does not melt ice through its heat of solution. For NaCl, ΔH is +3.9 kJ/mol, so dissolving cools it slightly. Ice melts because a salt solution freezes below 0 °C. Calcium chloride has an additional heat effect: it dissolves exothermically.

In short

  1. Exothermic dissolving releases heat and the solution temperature rises (ΔH < 0); endothermic dissolving absorbs heat and the temperature falls (ΔH > 0).
  2. The heat effect is the balance between the energy absorbed in the first step (breaking the lattice and some hydrogen bonds in water) and the energy released when the ions are hydrated.
  3. At 25 °C: NaOH −44.5 kJ/mol (exothermic); NaCl +3.9, NH₄Cl +14.8, NH₄NO₃ +25.7, KNO₃ +34.9 kJ/mol (endothermic).
  4. The heat exchanged by n mol dissolved in plenty of water is Q ≈ n · |ΔH|, with n = m ÷ M.
  5. Diluting sulfuric acid releases a lot of heat: acid is poured into water, never water into acid.
WorksheetMy notebook

Common mistakes

  • WrongEvery substance that dissolves warms the water.

    RightIt depends on the balance: NaOH warms it, while NH₄NO₃ and KNO₃ cool it. Table salt cools it very little.

  • WrongEndothermic dissolving cannot happen spontaneously.

    RightEndothermic dissolving happens because particles spread out and disorder increases. The sign of ΔH shows only the direction of the temperature change.

  • WrongSalt melts ice because it releases heat when it dissolves.

    RightNaCl dissolves slightly endothermically. Ice melts because a salt solution freezes below 0 °C.

Test yourself

7 questions. For the first 6 you see the explanation at once, with the paragraph of the lesson that supports it; for the written ones you compare with a good answer.

  1. The thermometer rises when a substance dissolves in a beaker of water. What does this mean?

    Answer

    b) Dissolving is exothermic and ΔH < 0. The solution warms, so the process releases heat: it is exothermic and ΔH is negative.

  2. Why does the solution cool when ammonium nitrate dissolves?

    Answer

    a) Separating the ions from the lattice and the water molecules takes more energy than hydration releases. When separating ions from the lattice and water molecules absorbs more energy than hydration releases, the difference comes from the solution and surroundings.

  3. How is a dilute sulfuric acid solution prepared in the laboratory?

    Answer

    c) Pour the acid into the water. Diluting sulfuric acid releases a lot of heat, so acid is poured into water. The teacher does this wearing protective equipment.

  4. For NaCl, ΔH = +3.9 kJ/mol. Why does salt melt ice on the road?

    Answer

    d) Because the salt solution freezes below 0 °C. Dissolving NaCl cools the solution slightly. Ice melts because the salt solution has a freezing point below 0 °C.

  5. 20 g of NaOH dissolves, M(NaOH) = 40 g/mol, ΔH = −44.5 kJ/mol. How many kJ are released? Round to one decimal place.

    kJ
    Answer

    22.3 kJ. n = 20 ÷ 40 = 0.5 mol, and Q = 0.5 · 44.5 = 22.25 kJ ≈ 22.3 kJ released.

  6. Put the steps for determining the heat effect of dissolving an ionic salt in order.

    Answer

    The correct order:

    1. Ions separate from the lattice: energy is absorbed
    2. Water molecules surround the free ions: energy is released
    3. The energy absorbed is compared with the energy released
    4. The balance gives the sign of ΔH and the direction of the temperature change

    The first two steps give the two amounts of energy; their balance determines whether the solution warms or cools.

  7. A pupil says: “If a substance absorbs heat when it dissolves, it cannot dissolve at all.” Respond with an example of a substance.

    A good answer

    The statement is false. Ammonium nitrate has ΔH = +25.7 kJ/mol, so it absorbs heat, yet it dissolves well in water. Dissolving happens spontaneously because particles spread among the water molecules and disorder increases; the sign of ΔH shows only whether the solution warms or cools.

    A complete answer gives an example of a substance that dissolves endothermically and says that the sign of ΔH does not determine whether it dissolves.

Terms

exothermic dissolving
Dissolving that releases heat, so the solution temperature rises; ΔH is negative.
endothermic dissolving
Dissolving that absorbs heat and cools the solution; ΔH is positive.
heat of solution
Heat exchanged when one mole of a substance dissolves, written ΔH and given in kJ/mol.
hydration
The surrounding of a dissolved ion or molecule by water molecules.
oxidising substance
A substance that supports the combustion of other substances, for example ammonium nitrate.
Sources and link to the programme

From the programme: “Heat effects of dissolving in water” (TC: Core curriculum (1 hour a week)). Specific competences followed: 2.5, 4.5, 6.3.