Chapter 9 · SolutionsLesson 9.5TC Core curriculum (1 hour a week) · beyond your profile
Preparing aqueous solutions of given percentage and molar concentrations, including from hydrates (crystal hydrates)
What 0.9% means on a bag of saline
A bag of saline says 0.9%, while pickle brine has a different number. How do you compare two salt solutions?
Before you read: what do you think?
You dissolve 20 g of salt in 80 g of water. What is the percentage concentration of the solution?
See the answer
The concentration is 20%. Divide by the mass of the solution, 20 + 80 = 100 g. Dividing by 80 g gives 25%.
A bag of saline says 0.9%, while a pickle recipe in many homes calls for between 20 and 30 grams of salt per litre of water. These are two salt solutions described in different ways: one as a percentage, the other in grams per litre. To compare them, you need the same scale: the chemistry scale is percentage concentration.
How many grams of substance are in one hundred grams of solution
Percentage concentration by mass (written c or c%) shows how many grams of dissolved substance are in 100 g of solution. A 10% salt solution has 10 g of salt in every 100 g of solution; the remaining 90 g is water.
Two masses are used: md, the mass of the dissolved substance, and ms, the mass of the solution. The mass of the solution is the sum of the masses of the dissolved substance and the solvent: ms = md + mwater. Calculate the concentration using the formula:
c = md · 100 ÷ ms
A percentage has no unit because the two masses are expressed in the same unit: if the masses are given in kilograms instead of grams, the result stays the same.
Three questions from the same formula
The formula links three quantities, so a problem can ask for any one of them if the other two are known. The mass of dissolved substance is md = c · ms ÷ 100. The mass of the solution is ms = md · 100 ÷ c. The mass of water is mwater = ms − md.
For example, to make 250 g of 8% solution, weigh out md = 8 · 250 ÷ 100 = 20 g of substance and mwater = 250 − 20 = 230 g of water.
Mass is read on a balance, but in the lab and kitchen volume is easier to measure. Density links the two: ρ = m ÷ V, so m = ρ · V. A volume of 50 mL of a solution with a density of 1.2 g/mL weighs 1.2 · 50 = 60 g. Masses add up; the volumes of solutions do not add up exactly. That is why percentage concentration problems use masses.
What stays the same when you add water or mix solutions
During dilution and concentration, the mass of dissolved substance stays the same. When solutions are mixed, the total mass of dissolved substance is the sum of the masses from the solutions, provided no reaction takes place. Concentration changes, so start each problem by finding md.
Dilution means adding solvent: md stays the same, ms increases and c falls. Add 100 g of water to 200 g of 10% solution. The dissolved substance is md = 10 · 200 ÷ 100 = 20 g, the new mass of solution is 200 + 100 = 300 g, and c = 20 · 100 ÷ 300 ≈ 6.67%. The concentration does not halve just because “more water” was added: calculate it using the new mass of solution.
Concentration is done by evaporating some of the solvent, in which case md stays the same and ms falls, or by adding dissolved substance, in which case both masses increase. To mix two solutions of the same substance, add the masses of dissolved substance and the masses of solution, then calculate c. The result is always between the two starting concentrations, closer to that of the solution with the greater mass.
The denominator mistake: water instead of solution
The most common mistake is dividing by the mass of water. If 10 g of salt dissolves in 100 g of water, the solution has a mass of 110 g and the concentration is c = 10 · 100 ÷ 110 ≈ 9.1%. A concentration of 10% would require 10 g of salt in 100 g of solution, which means 90 g of water.
Labels need the same care. The percentage on a medicine may refer to the volume of solution rather than its mass: for saline, 0.9% means 0.9 g of sodium chloride per 100 mL of solution. A litre of saline weighs just over 1,000 g (a 1% NaCl solution has a density of 1.005 g/mL at 20 °C), so for such dilute solutions the percentage based on volume and the percentage by mass are practically equal. They differ for concentrated solutions: 100 mL of concentrated hydrochloric acid weighs 119 g.
For the curious
Alcoholic drink labels show “% vol”, the volume of alcohol per 100 volumes of drink. This is different from percentage by mass, and the two must not be mixed in calculations. For very dilute solutions in water, milligrams per litre are also used: 1 mg per 1 L of water is one part per million parts, 1 ppm.
Worked example
Mixing two salt solutions
Mix 200 g of 10% sodium chloride solution with 300 g of 20% solution. What is the concentration of the mixture, and what mass of water must be added to reach 10%?
Masses of dissolved substance: md1 = 10 · 200 ÷ 100 = 20 g and md2 = 20 · 300 ÷ 100 = 60 g. Together: 20 + 60 = 80 g.
Mass of the mixture: ms = 200 + 300 = 500 g. Concentration: c = 80 · 100 ÷ 500 = 16%.
Check: 16% is between 10% and 20%, closer to 20% because the 20% solution has the greater mass.
For 10%, the same 80 g of substance must be in ms = 80 · 100 ÷ 10 = 800 g of solution. Add mwater = 800 − 500 = 300 g of water.
The simple average of the concentrations, 15%, would be correct only for equal masses of the two solutions.
In Romania
Pickle brine and a bag of saline
In Romanian homes, the usual advice for pickles is 20–30 g of salt per litre of water, for both sauerkraut and cucumbers in brine (Puterea.ro, 15 September 2025). A litre of water has a mass of 1,000 g, so 25 g of salt gives 1,025 g of solution: c = 25 · 100 ÷ 1,025 ≈ 2.4%. The ends of the range give 20 · 100 ÷ 1,020 ≈ 2.0% and 30 · 100 ÷ 1,030 ≈ 2.9%.
The brine is therefore 2–3% salt. Saline has 9 g of sodium chloride per litre of solution, or 0.9 g per 100 mL, and is about three times less salty than the brine.
In short
- Percentage concentration by mass is the number of grams of dissolved substance in 100 g of solution: c = md · 100 ÷ ms.
- The mass of the solution is the sum of the masses of the dissolved substance and the solvent: ms = md + mwater; divide by ms, never by mwater.
- The formula gives md = c · ms ÷ 100 and ms = md · 100 ÷ c.
- During dilution md stays the same, ms increases and c falls; when solutions are mixed, the masses of dissolved substance and the masses of solution are added.
- The concentration of a mixture lies between the concentrations of the solutions mixed; the simple average is correct only for equal masses.
- The density equation, ρ = m ÷ V, links the mass of a solution to its volume.
Common mistakes
WrongA 10% solution has 10 g of substance in 100 g of water.
RightIt has 10 g of substance in 100 g of solution, which means 90 g of water. If 10 g dissolves in 100 g of water, the solution has a mass of 110 g and a concentration of about 9.1%.
WrongIf I add 100 g of water, the concentration halves.
RightCalculate the concentration using the new mass of solution. Add 100 g of water to 200 g of 10% solution: c = 20 · 100 ÷ 300 ≈ 6.67%.
WrongMixing 10% and 20% solutions gives 15%.
RightThe result is 15% only for equal masses. For 200 g of 10% solution and 300 g of 20% solution, the mixture is 16%.
Test yourself
7 questions. For the first 6 you see the explanation at once, with the paragraph of the lesson that supports it; for the written ones you compare with a good answer.
Which mass is the mass of dissolved substance compared with in the percentage concentration formula?
Answer
b) Mass of solution. The percentage gives grams of substance per 100 g of solution, so the denominator is the mass of the solution.
10 g of salt dissolves in 100 g of water. What is the concentration of the solution?
Answer
d) About 9.1%. The solution has a mass of 110 g, and 10 · 100 ÷ 110 ≈ 9.1%.
Water is added to a solution, with no reaction. Which quantity stays the same?
Answer
c) Mass of dissolved substance. The added water increases the mass of the solution and lowers the concentration, but the dissolved substance stays the same.
What mass of dissolved substance, in grams, is in 250 g of 8% solution?
gAnswer
20 g. md = c · ms ÷ 100 = 8 · 250 ÷ 100 = 20 g.
Add 100 g of water to 200 g of 10% solution. What is the concentration of the resulting solution, as a percentage, rounded to two decimal places?
%Answer
6.67 %. md = 20 g remains, and ms = 300 g: 20 · 100 ÷ 300 ≈ 6.67%.
You are preparing 200 g of 15% salt solution. Put the steps in order.
Answer
The correct order:
- Calculate md = 15 · 200 ÷ 100 = 30 g
- Calculate mwater = 200 − 30 = 170 g
- Weigh out 30 g of salt and 170 g of water, in either order
- Mix until the crystals disappear
First calculate the masses, then weigh the salt and water in either order, then mix.
A classmate says that 10 g of salt in 100 g of water gives a 10% solution. Explain the mistake and calculate the correct concentration.
A good answer
The percentage refers to the mass of the solution, not the water. The solution has a mass of 10 + 100 = 110 g, so c = 10 · 100 ÷ 110 ≈ 9.1%. For 10%, you would need 10 g of salt in 90 g of water.
A complete answer states that the denominator is the mass of the solution and calculates 110 g and 9.1%.
Terms
- percentage concentration by mass
- The number of grams of dissolved substance in 100 g of solution.
- mass of solution
- The sum of the masses of the dissolved substance and the solvent, written ms.
- dilution
- The addition of solvent to a solution, lowering its concentration.
- concentration
- An increase in the concentration of a solution by evaporating solvent or adding dissolved substance.
- density
- The ratio of the mass of a substance or solution to its volume, ρ = m ÷ V.
Sources and link to the programme
- Engineering ToolBox – Densities of aqueous solutions of inorganic chlorides – density of 1% NaCl solution at 20 °C, 1.0053 g/cm³: a litre of saline weighs just over 1,000 g
- OpenStax – Chemistry 2e, 3.4 Other Units for Solution Concentrations – definition of percentage by mass as the ratio of the mass of a component to the mass of solution; concentrated hydrochloric acid, 37.2%, 1.19 g/mL
- OMS / MSF – Essential drugs: practical guidelines (2016) – saline: 0.9 g of sodium chloride per 100 mL of solution
- Puterea.ro – Ce cantitate de sare se pune la murături și de ce (15 septembrie 2025) – 20–30 g of salt per litre of water, for sauerkraut and cucumbers in brine
- PubChem – Sodium chloride – formula and molar mass of sodium chloride
From the programme: “Preparing aqueous solutions of given percentage and molar concentrations, including from hydrates (crystal hydrates)”; “Preparing aqueous solutions of given percentage and molar concentrations” (TC: Core curriculum (1 hour a week)). Specific competences followed: 1.5, 3.5.