Chapter test · MI: Mathematics–informatics (2 hours)
Chemistry test, grade 9: chapter 3, Redox reactions and electrochemical cells – who loses electrons and who gains them
What does the half-reaction Zn → Zn²⁺ + 2e⁻ describe?
- Oxidation of zinc: loss of electrons
- Reduction of zinc: gain of electrons
- Oxidation of zinc: combination with oxygen
- A reaction with no change in oxidation number
Which reaction is a redox reaction?
- HCl + NaOH → NaCl + H₂O
- AgNO₃ + NaCl → AgCl + NaNO₃
- CaCO₃ → CaO + CO₂
- 2Mg + O₂ → 2MgO
What mass of silver, in grams, is deposited when 3.2 g of copper reacts completely with silver nitrate? Use M(Cu) = 64 g/mol and M(Ag) = 108 g/mol.
Answer: g
What volume of hydrogen, in litres, at normal conditions, is released when 6.5 g of zinc reacts completely with dilute hydrochloric acid? Use M(Zn) = 65 g/mol and VM = 22.4 L/mol.
Answer: L
Oxidising or reducing agent in common reactions? Sort each species.
Write each card under the right group.
Usually an oxidising agentUsually a reducing agentO₂ZnH₂COCl₂KMnO₄
Put the steps of the electron balance method in order.
Write the number of the step in the box: 1 for the first, 6 for the last.
- Balance the electrons (lowest common multiple)
- Write the skeleton equation without coefficients
- Write the half-reactions with electrons
- Find the oxidation numbers
- Balance metals, non-metals and hydrogen, then check oxygen
- Put coefficients in front of the redox species
What do electrons travel through in a working Daniell cell?
- The solutions and the salt bridge
- The metal wire, from zinc to copper
- The metal wire, from copper to zinc
- The salt bridge, from copper to zinc
During discharge of a lead–acid battery, the reaction Pb + PbO₂ + 2H₂SO₄ → 2PbSO₄ + 2H₂O takes place in a cell. It uses up 0.050 mol of lead. What mass of H₂SO₄ is used up? M(H₂SO₄) = 98 g/mol. Answer in grams, to one decimal place.
Answer: g
Put the stages of an electron’s journey in order during discharge of a lithium-ion battery with graphite and cobalt oxide.
Write the number of the step in the box: 1 for the first, 4 for the last.
- The electron passes through the external circuit, through the phone
- Cobalt receives the electron and its oxidation number falls from +4 to +3
- Lithium from LiC₆ leaves the graphite as an ion and leaves its electron in the graphite
- The electron reaches the cobalt oxide electrode
Does each statement describe an electrochemical cell (a source of current) or electrolysis? Place each statement with the matching device.
Write each card under the right group.
CellElectrolysisThe anode is positiveChemical energy becomes electrical energyThe anode is negativeThe power supply provides energyElectrical energy becomes chemical energyThe reaction takes place on its own
Key: chapter 3, MI
Page for the teacher. Each question is worth 1 point if the whole answer is right; for the ordering and grouping questions the point is given only for the complete answer. The teacher decides the grade scale.
a) Oxidation of zinc: loss of electrons. Zinc gives up two electrons, and its oxidation number rises from 0 to +2. Loss of electrons is oxidation. (lesson 3.1)
d) 2Mg + O₂ → 2MgO. Only in 2Mg + O₂ → 2MgO do oxidation numbers change: magnesium from 0 to +2, oxygen from 0 to −2. In the other three, each element keeps the same oxidation number. (lesson 3.1)
10.8 g (a difference of up to 0.05 is accepted). n(Cu) = 3.2 ÷ 64 = 0.05 mol; 2 mol of Ag are deposited for every 1 mol of Cu, so n(Ag) = 0.1 mol and m(Ag) = 0.1 · 108 = 10.8 g. (lesson 3.2)
2.24 L (a difference of up to 0.005 is accepted). n(Zn) = 6.5 ÷ 65 = 0.1 mol; one mole of zinc produces one mole of hydrogen, so V = 0.1 · 22.4 = 2.24 L. (lesson 3.2)
Usually an oxidising agent: O₂; Cl₂; KMnO₄. Usually a reducing agent: Zn; H₂; CO. O₂, Cl₂ and KMnO₄ readily accept electrons (they are reduced); active metals, H₂ and CO give them up (they are oxidised). (lesson 3.3)
The correct order: 1. Write the skeleton equation without coefficients; 2. Find the oxidation numbers; 3. Write the half-reactions with electrons; 4. Balance the electrons (lowest common multiple); 5. Put coefficients in front of the redox species; 6. Balance metals, non-metals and hydrogen, then check oxygen. Electrons are balanced before water and hydrogen; oxygen is the final check. (lesson 3.4)
b) The metal wire, from zinc to copper. Zinc is oxidised and releases its electrons into the metal; the external wire is their only path to copper. (lesson 3.7)
9.8 g (a difference of up to 0.05 is accepted). For every 1 mol of Pb, 2 mol of H₂SO₄ are used up: n = 2 · 0.050 = 0.10 mol, and m = 0.10 · 98 = 9.8 g. (lesson 3.8)
The correct order: 1. Lithium from LiC₆ leaves the graphite as an ion and leaves its electron in the graphite; 2. The electron passes through the external circuit, through the phone; 3. The electron reaches the cobalt oxide electrode; 4. Cobalt receives the electron and its oxidation number falls from +4 to +3. The electron leaves the graphite, passes through the phone and is received by cobalt in the oxide. (lesson 3.9)
Cell: The reaction takes place on its own; The anode is negative; Chemical energy becomes electrical energy. Electrolysis: The power supply provides energy; The anode is positive; Electrical energy becomes chemical energy. A cell produces current from a spontaneous reaction, while electrolysis uses current to force a reaction that does not happen on its own. (lesson 3.10)