Chapter test · SN: Natural sciences (3 hours)
Chemistry test, grade 9: chapter 3, Redox reactions and electrochemical cells – who loses electrons and who gains them
What does the half-reaction Zn → Zn²⁺ + 2e⁻ describe?
- Oxidation of zinc: loss of electrons
- Reduction of zinc: gain of electrons
- Oxidation of zinc: combination with oxygen
- A reaction with no change in oxidation number
What mass of silver, in grams, is deposited when 3.2 g of copper reacts completely with silver nitrate? Use M(Cu) = 64 g/mol and M(Ag) = 108 g/mol.
Answer: g
Oxidising or reducing agent in common reactions? Sort each species.
Write each card under the right group.
Usually an oxidising agentUsually a reducing agentKMnO₄O₂Cl₂COH₂Zn
Put the steps of the electron balance method in order.
Write the number of the step in the box: 1 for the first, 6 for the last.
- Write the half-reactions with electrons
- Balance the electrons (lowest common multiple)
- Balance metals, non-metals and hydrogen, then check oxygen
- Find the oxidation numbers
- Put coefficients in front of the redox species
- Write the skeleton equation without coefficients
Purple permanganate solution is added to a neutral solution of a reducing agent and a brown precipitate appears. What is the precipitate?
- Manganese(II) sulfate, MnSO₄
- Manganese dioxide, MnO₂
- Potassium manganate, K₂MnO₄
- Metallic manganese, Mn
What mass of iron, in grams, is produced from 48 g of Fe₂O₃ completely reduced with CO? Take M(Fe₂O₃) = 160 g/mol and M(Fe) = 56 g/mol.
Answer: g
Put the path of electrons in a working Daniell cell in order, from zinc to the deposition of copper.
Write the number of the step in the box: 1 for the first, 5 for the last.
- Electrons pass through the external wire
- Copper atoms deposit on the electrode
- Cu²⁺ ions from the solution gain electrons
- Electrons reach the copper electrode
- Zinc atoms at the negative electrode give up electrons
In a lead–acid battery (Pb and PbO₂ in H₂SO₄), does each statement describe discharge or charging? Place each statement under the right process.
Write each card under the right group.
During dischargeDuring chargingPb and PbO₂ formSulfuric acid is used upThe solution’s density fallsPbSO₄ forms on both platesAn electric current is sent into the batterySulfuric acid forms
In a phone’s lithium-ion battery during discharge, what passes through the external circuit, that is, through the phone?
- Li⁺ ions
- Electrons
- Lithium atoms
- Electrolyte molecules
What mass of sodium, in grams, is obtained by electrolysis of 29.25 g of molten NaCl? Take M(NaCl) = 58.5 g/mol and M(Na) = 23 g/mol.
Answer: g
Key: chapter 3, SN
Page for the teacher. Each question is worth 1 point if the whole answer is right; for the ordering and grouping questions the point is given only for the complete answer. The teacher decides the grade scale.
a) Oxidation of zinc: loss of electrons. Zinc gives up two electrons, and its oxidation number rises from 0 to +2. Loss of electrons is oxidation. (lesson 3.1)
10.8 g (a difference of up to 0.05 is accepted). n(Cu) = 3.2 ÷ 64 = 0.05 mol; 2 mol of Ag are deposited for every 1 mol of Cu, so n(Ag) = 0.1 mol and m(Ag) = 0.1 · 108 = 10.8 g. (lesson 3.2)
Usually an oxidising agent: O₂; Cl₂; KMnO₄. Usually a reducing agent: Zn; H₂; CO. O₂, Cl₂ and KMnO₄ readily accept electrons (they are reduced); active metals, H₂ and CO give them up (they are oxidised). (lesson 3.3)
The correct order: 1. Write the skeleton equation without coefficients; 2. Find the oxidation numbers; 3. Write the half-reactions with electrons; 4. Balance the electrons (lowest common multiple); 5. Put coefficients in front of the redox species; 6. Balance metals, non-metals and hydrogen, then check oxygen. Electrons are balanced before water and hydrogen; oxygen is the final check. (lesson 3.4)
b) Manganese dioxide, MnO₂. In neutral solution manganese falls to N.O. +4 in MnO₂, which is insoluble and brown. Manganate is green and appears in strongly basic solution, while MnSO₄ forms in acidic solution. (lesson 3.5)
33.6 g (a difference of up to 0.05 is accepted). n(Fe₂O₃) = 48 ÷ 160 = 0.3 mol; n(Fe) = 2 · 0.3 = 0.6 mol; m = 0.6 · 56 = 33.6 g. (lesson 3.6)
The correct order: 1. Zinc atoms at the negative electrode give up electrons; 2. Electrons pass through the external wire; 3. Electrons reach the copper electrode; 4. Cu²⁺ ions from the solution gain electrons; 5. Copper atoms deposit on the electrode. Electrons leave the zinc, travel through the wire to the copper and are gained by Cu²⁺ ions, which become copper atoms. (lesson 3.7)
During discharge: Sulfuric acid is used up; PbSO₄ forms on both plates; The solution’s density falls. During charging: Pb and PbO₂ form; An electric current is sent into the battery; Sulfuric acid forms. Discharge turns Pb and PbO₂ into PbSO₄ and uses up acid; charging is the reverse reaction, driven by an electric current. (lesson 3.8)
b) Electrons. Electrons cannot pass through the separator and electrolyte; their route is the external circuit. Li⁺ ions pass through the electrolyte. (lesson 3.9)
11.5 g (a difference of up to 0.05 is accepted). n(NaCl) = 29.25 ÷ 58.5 = 0.5 mol; n(Na) = n(NaCl) = 0.5 mol; m(Na) = 0.5 · 23 = 11.5 g. (lesson 3.10)