Chapter test · TC: Core curriculum (1 hour a week)
Chemistry test, grade 9: chapter 3, Redox reactions and electrochemical cells – who loses electrons and who gains them
What does the half-reaction Zn → Zn²⁺ + 2e⁻ describe?
- Oxidation of zinc: loss of electrons
- Reduction of zinc: gain of electrons
- Oxidation of zinc: combination with oxygen
- A reaction with no change in oxidation number
A nail contains 2.8 g of iron. How many moles of electrons does the iron give up when it is completely oxidised to Fe²⁺? Given M(Fe) = 56 g/mol.
Answer: mol
What mass of silver, in grams, is deposited when 3.2 g of copper reacts completely with silver nitrate? Use M(Cu) = 64 g/mol and M(Ag) = 108 g/mol.
Answer: g
Put the metals in the order of the activity series, from most active to least active.
Write the number of the step in the box: 1 for the first, 5 for the last.
- Fe
- Ag
- Mg
- Zn
- Cu
Put the path of electrons in a working Daniell cell in order, from zinc to the deposition of copper.
Write the number of the step in the box: 1 for the first, 5 for the last.
- Electrons reach the copper electrode
- Copper atoms deposit on the electrode
- Cu²⁺ ions from the solution gain electrons
- Electrons pass through the external wire
- Zinc atoms at the negative electrode give up electrons
What do electrons travel through in a working Daniell cell?
- The solutions and the salt bridge
- The metal wire, from zinc to copper
- The metal wire, from copper to zinc
- The salt bridge, from copper to zinc
In a lead–acid battery (Pb and PbO₂ in H₂SO₄), does each statement describe discharge or charging? Place each statement under the right process.
Write each card under the right group.
During dischargeDuring chargingAn electric current is sent into the batteryPb and PbO₂ formSulfuric acid formsThe solution’s density fallsSulfuric acid is used upPbSO₄ forms on both plates
During discharge of a lead–acid battery, the reaction Pb + PbO₂ + 2H₂SO₄ → 2PbSO₄ + 2H₂O takes place in a cell. It uses up 0.050 mol of lead. What mass of H₂SO₄ is used up? M(H₂SO₄) = 98 g/mol. Answer in grams, to one decimal place.
Answer: g
In a phone’s lithium-ion battery during discharge, what passes through the external circuit, that is, through the phone?
- Li⁺ ions
- Electrons
- Lithium atoms
- Electrolyte molecules
Put the stages of an electron’s journey in order during discharge of a lithium-ion battery with graphite and cobalt oxide.
Write the number of the step in the box: 1 for the first, 4 for the last.
- The electron passes through the external circuit, through the phone
- Cobalt receives the electron and its oxidation number falls from +4 to +3
- Lithium from LiC₆ leaves the graphite as an ion and leaves its electron in the graphite
- The electron reaches the cobalt oxide electrode
Key: chapter 3, TC
Page for the teacher. Each question is worth 1 point if the whole answer is right; for the ordering and grouping questions the point is given only for the complete answer. The teacher decides the grade scale.
a) Oxidation of zinc: loss of electrons. Zinc gives up two electrons, and its oxidation number rises from 0 to +2. Loss of electrons is oxidation. (lesson 3.1)
0.1 mol (a difference of up to 0.05 is accepted). n(Fe) = 2.8 ÷ 56 = 0.05 mol, and each atom gives up two electrons: 0.05 · 2 = 0.1 mol. (lesson 3.1)
10.8 g (a difference of up to 0.05 is accepted). n(Cu) = 3.2 ÷ 64 = 0.05 mol; 2 mol of Ag are deposited for every 1 mol of Cu, so n(Ag) = 0.1 mol and m(Ag) = 0.1 · 108 = 10.8 g. (lesson 3.2)
The correct order: 1. Mg; 2. Zn; 3. Fe; 4. Cu; 5. Ag. The order in the series is K, Ca, Na, Mg, Al, Zn, Fe, Ni, Sn, Pb, (H), Cu, Hg, Ag, Pt, Au. (lesson 3.2)
The correct order: 1. Zinc atoms at the negative electrode give up electrons; 2. Electrons pass through the external wire; 3. Electrons reach the copper electrode; 4. Cu²⁺ ions from the solution gain electrons; 5. Copper atoms deposit on the electrode. Electrons leave the zinc, travel through the wire to the copper and are gained by Cu²⁺ ions, which become copper atoms. (lesson 3.7)
b) The metal wire, from zinc to copper. Zinc is oxidised and releases its electrons into the metal; the external wire is their only path to copper. (lesson 3.7)
During discharge: Sulfuric acid is used up; PbSO₄ forms on both plates; The solution’s density falls. During charging: Pb and PbO₂ form; An electric current is sent into the battery; Sulfuric acid forms. Discharge turns Pb and PbO₂ into PbSO₄ and uses up acid; charging is the reverse reaction, driven by an electric current. (lesson 3.8)
9.8 g (a difference of up to 0.05 is accepted). For every 1 mol of Pb, 2 mol of H₂SO₄ are used up: n = 2 · 0.050 = 0.10 mol, and m = 0.10 · 98 = 9.8 g. (lesson 3.8)
b) Electrons. Electrons cannot pass through the separator and electrolyte; their route is the external circuit. Li⁺ ions pass through the electrolyte. (lesson 3.9)
The correct order: 1. Lithium from LiC₆ leaves the graphite as an ion and leaves its electron in the graphite; 2. The electron passes through the external circuit, through the phone; 3. The electron reaches the cobalt oxide electrode; 4. Cobalt receives the electron and its oxidation number falls from +4 to +3. The electron leaves the graphite, passes through the phone and is received by cobalt in the oxide. (lesson 3.9)